CS Mini Series Couplings For shaft to shaft connection CS Mini series clutches are available with an elastomeric coupling for all the sizes and modes of operation, simple overload, synchronous overload. The elastomeric Coupling permits up to 1/2 degree of angular misalignment, with 0.3mm radial, and a maximum of CS Mini Series Couplings 0.5mm axial. The rubber element absorbs peak shocks, providing greater accuracy in overload protection. Up to four torque ranges are available on each size of clutch, controlled by selection of the actuating spring set, providing a wide range of torque capacities to select from. The series is suitable for moderate speed applications with low radial forces and infrequent tripping. The design is suited to inline stop switch, or proximity switch, see page 26. E-CC CS Mini Series Couplings - Technical Capacities Catalogue Part Numbers To order Safegard series clutches it is essential to identify clutch type, size (refers to max bore capacity), connection flange design, and spring ratings for correct torque, (see rating for each clutch). Examples Clutch Reference C SF 35'A/M is a Safegard (type CSF) size 35, design A with M rated springs (25-50 Nm). CSY 25E/L is a Synchron (type CSY) size 25, design E (Mini Series) with L rated springs (50-100 Nm). Couplings are identified by suffix - CC, e.g. CSY 25E/L - CC is coupling version of above clutch. Clutches come with pilot bores, but can be supplied finish bored if specified on order. 27 <4 INDEX ^ BACK NEXT