PRODUCT DESCRIPTION Based on new chemistry, PS1081 - PS1084 -PS1087 Ultra Performance Energy Surfacer from Cromax leads to a much more productive preparation process. With a very impressive air-drying performance, it's ideal for all bodyshops who would like to break throughput records. A new surfacer that breaks records for throughput. 02 03 04 05 06 07 Very impressive air-drying performance. It can be sanded from as quickly as 20 minutes after air drying, depending on local climate conditions. IR and low bake with shortest drying times are possible too. The high-quality appearance, with a smooth surface, provides outstanding gloss hold-out after top coating. Easy to apply, in up to four coats, with very good vertical stability. Simple 1:1 mixing ratio with AR7802 Energy Surfacer Activator. On metal substrate, the use of PS1800 Metal Pretreatment Wipes is mandatory. Spot repairs, small area repairs, refinishing of parts, in fact any type of repair of any size can be handled at the same time, thanks to air-drying. Part of the ValueShade concept: available in white (VS1), grey (VS4), and black (VS7). AN AXALTA COATING SYSTEMS BRAND 1 of 5 | EN PS108x - 38 | 24.03.2020 This Technical Data Sheet supersedes all previous issues

TECHNICAL DATA SHEET PS1081 - PS1084 - PS1087 ULTRA PERFORMANCE ENERGY SURFACERProduct preparation - application STANDARD SANDING It is strongly recommended to use appropriate personal protection equipment during application to avoid respiratory, skin and eye irritation. Steel, galvanised steel and soft aluminium, sanded and cleaned, treated with PS1800 Metal Pretreatment Wipes Old or original paintwork well sanded and cleaned. OEM Primer (e-coat), sanded and cleaned Surfaces pretreated with 2K polyester products and then finely sanded and cleaned VOC compliant 2004/42/IIB(c)(540) 540: The EU...

Product preparation - application STANDARD PLASTICS It is strongly recommended to use appropriate personal protection equipment during application to avoid respiratory, skin and eye irritation. Repairs to exterior common plastic car parts, sanded and cleaned. OEM Primer for plastic, scuff sanded and cleaned. Glass fibre reinforced polyester substrates, free of release agents, sanded and cleaned. Plastic substrates coated with 800R/800RA Plastic Adhesion Promotor. * Below 15°C & 30% RH, when drying is too slow, use AR7801 Energy Surfacer Activator LT/LH. Pot life at 20°C: 30 min - 1 hr * Setting...

TECHNICAL DATA SHEET PS1081 - PS1084 - PS1087 ULTRA PERFORMANCE ENERGY SURFACER Products PS1081 Ultra Performance Energy Surfacer - VS1 PS1084 Ultra Performance Energy Surfacer - VS4 PS1087 Ultra Performance Energy Surfacer - VS7 AR7801 Energy Surfacer Activator LT/LH AR7802 Energy Surfacer Activator 805R Flexible Additive AZ9405 Elastic Additive AZ9800 Energy Surfacer Accelerator XB383 Standard Thinner XB387 HI-Temp Thinner Product mix Mixing ratios with special agents are available in the productmix table on ChromaWeb and in the specific TDS. Theoretical coverage 390 m²/l at 1 micron dry film...

TECHNICAL DATA SHEET PS1081 - PS1084 - PS1087 ULTRA PERFORMANCE ENERGY SURFACERRemarks ■ Mix thoroughly by hand before placing the can on mixing machine. ■ Humidity has an accelerating influence on the drying performance and potlife. ■ Do not use Wash Primer under Ultra Performance Energy Surfacer PS1081 - PS1084 - PS1087. ■ The use of the PS1800 Metal Pretreatment Wipes is mandatory for bare metal substrates. Non-use can be detected analytically. ■ Material has to be at room temperature (18-25°C) before use. ■ Can also be applied with short intermediate flash-off time to isolate Putty repairs....