3750S
4Pages

3750S ULTRA PRODUCTIVE VOC CLEAR 01 02 PRODUCT DESCRIPTION Ultra Productive VOC Clear 3750S is a clearcoat that dries very quickly at any temperature, from winter cold to summer heat. It provides the right mix for nearly all operating conditions and can be applied over waterborne and solventborne basecoats. It is part of the Ultra Productive 2K VOC clearcoat system. Application in 1.5 coats helps to save time and product. Delivers consistently good, durable high-build finish under almost any ambient temperature. Offers short flash-off times between coats and bake cycles. Dries very quickly at ambient air temperatures. Can be applied over Cromax solventbased and waterbased basecoats. AN AXALTA COATING SYSTEMS BRAND Helps increase productivity whether air drying, baked at low temperatures or using IR drying. Has excellent polishing qualities. 1 of 4 | EN 3750S - 35 | 31.03.2020 This Technical Data Sheet supersedes all previous issues

TECHNICAL DATA SHEET 3750S ULTRA PRODUCTIVE VOC CLEARProduct preparation - application STANDARD 0.5 + 1 1 operation 1st: thin and closed 2nd: normal It is strongly recommended to use appropriate personal protection equipment during application to avoid respiratory, skin and eye irritation. Cromax Pro Basecoat / Cromax Basecoat: Surfaces must be dried / flashed-off in accordance with TDS before application Existing finishes: Surfaces must be sanded and degreased before application For drying options, see details page. Guideline for short wave IR equipment Half power: 5 min Full power: 10 -...

Products 3750S Ultra Productive VOC Clear XK203 Low Emission Activator Fast XK205 Low Emission Activator XK206 Low Emission Activator Slow 3989S Retarder 430R Varispeed Thinner 431R Varispeed Ultra XB387 HI-Temp Thinner Product mix Mixing ratios with special agents are available in the productmix table on ChromaWeb and in the specific TDS. Theoretical 475 - 480 m2/l at 1 micron dry film thickness coverage Due to different activator characteristics and different mixing ratios of the ready-to-use mixture in some TDS versions, the theoretical coverage calculation may vary. Note: The practical...

TECHNICAL DATA SHEET 3750S ULTRA PRODUCTIVE VOC CLEAR 3750S Ultra Productive VOC Clear can be overcoated with itself within 24 hours, without intermediate sanding Clean after use with a suitable solventbased guncleaner. Material has to be at room temperature (18-25°C) before use. Allow additional time for preheating up to panel temperature. Surplus ready for use material should not be returned to original can. Close can of Activator tightly immediately after use, as this product will react with humid air and water and lose its hardening effect. Can also be applied in 2 coats, respecting 10...