Food & Bev Nylon 6,6 Cartridge Filters


Catalog excerpts

Food & Bev Nylon 6,6 Cartridge Filters - 1

FNM Cartridge Filters Nylon 6,6 Membrane Applications Syrup Soft Drinks Bottled Water Process Water Integrity Test Specifications Water-wetted membrane 0.10 μm Filtration Media Media Support Center Core Outer Support Cage Sealing Method Thermal Bonding Buna, Viton® (or FKM), EP, Silicone, FEP Encapsulated Silicone, FEP Encapsulated Viton (or FKM) < 30 cc/min at 20 psig (1.4 barg) < 30 cc/min at 15 psig (1.0 barg) Dimensions Length Outside Diameter Filtration Area Maximum Operating Parameters Differential Pressure • Forward (in water) < 30 cc/min at 35 psig (2.4 barg) Construction Materials < 30 cc/min at 48 psig (3.3 barg) FNM Membrane Filter Cartridges are designed to comply with all FDA requirements for the food industry. Nylon is particularly well suited for water and syrup filtration. Nylon is not recommended for filtering fermented beverages or liquids with high protein content. Contact Critical Process Filtration to discuss using this cartridge as a low cost alternative in compressed gas filtration. These cartridges have been rinsed with high purity water to ensure that manufacturing debris will not contaminate your product. This washing also removes extractables that may affect the taste of the product. Total Performance Critical Process Filtration, Inc. is a vertically integrated manufacturer of filtration products to industries in which filtration is considered a critical part of the manufacturing process. We supply a complete line of products and services to help you cost effectively satisfy all your filtration requirements from a single source. Operating Temperature Recommended Changeout Pressure 82 °C (180 °F) at 10 psid (0.69 bard) in water 35 psid (2.4 bard) Sanitization/Sterilization Filtered Hot Water 90 °C (194 °F), 30 minutes, multiple cycles, max 3 psid forward flow In-line Steam For all elevated temperature procedures above, a stainless steel support ring is required. Chemical Sanitization Nylon does not tolerate aggressive chemical sanitization protocols. Nylon membrane cartridges are best sanitized with 1% hydrogen peroxide or 1% hydrogen peroxide and peracetic acid. Various manufacturers use different concentrations of active ingredients. Refer and adhere to the manufacturer’s instructions for sanitizing nylon membrane. Food and Beverage Grade Pore Size

Open the catalog to page 1
Food & Bev Nylon 6,6 Cartridge Filters - 2

All Critical Process Filtration cartridge filters are designed to meet the FDA requirements for processing food and beverage products. The materials used to construct food & beverage grade filters are listed by the FDA as appropriate for use in articles intended for repeated food contact as specified in Title 21 CFR sections 174.5, 177.1500, 177.1520, 177.1630, 177.2440 and 177.2600 as appropriate. FNM filters comply with Title 21 CFR sections 210.3 (b)(6) and 211.72, for non-fiber releasing filters. All materials used to make the filters are listed in European Commission Regulation...

Open the catalog to page 2

All Critical Process Filtration catalogs and technical brochures