ENM Cartridge Filters Nylon 6,6 Membrane Process Water Integrity Test Specifications Per 10-in. length, water-wetted membrane Pore Size 0.10 μm < 30 cc/min at 35 psig (2.4 barg) < 30 cc/min at 20 psig (1.4 barg) < 30 cc/min at 15 psig (1.0 barg) Maximum Operating Parameters Differential Pressure • Forward (in water) Operating Temperature Recommended Changeout Pressure 82 °C (180 °F) at 10 psid (0.69 bard) in water 35 psid (2.4 bard) Filtration Media 90 °C (194 °F), 30 minutes, multiple cycles, max 3 psid forward flow Media Support In-line Steam Center Core Outer Support Cage For all elevated temperature procedures above, a stainless steel support ring is required. Sealing Method Thermal Bonding Chemical Sanitization Buna, Viton® (or FKM), EP, Silicone, FEP Encapsulated Silicone, FEP Encapsulated Viton (or FKM) Nylon does not tolerate aggressive chemical sanitization protocols. Nylon membrane cartridges are best sanitized with 1% hydrogen peroxide or 1% hydrogen peroxide and peracetic acid. Various manufacturers use different concentrations of active ingredients. Refer and adhere to the manufacturer’s instructions for sanitizing nylon membrane.. Dimensions Length Outside Diameter Filtration Area Total Performance Critical Process Filtration, Inc. is a vertically integrated manufacturer of filtration products to industries in which filtration is considered a critical part of the manufacturing process. We supply a complete line of products and services to help you cost effectively satisfy all your filtration requirements from a single source. Electronics Grade Construction Materials < 30 cc/min at 48 psig (3.3 barg) ENM Filter Cartridges are designed to meet the special needs of the electronics and high purity chemical industries. Able to remove particles below the rated pore size of the membrane, these cartridges are cost effective and exhibit superior retention. They are often used for DI water, photoresists, developers, and other compatible chemicals. Each cartridge module is pulse power flushed until the rinse effluent reaches 18+ megohm‑cm, and less than 3 ppb TOC. Each cartridge module is also individually tested for integrity. Our design criteria and special procedures allow us to provide the highest quality electronics grade cartridges.

Quality Assurance and Standards Our goal is to ensure our customers the greatest possible value for their filtration dollar. Our state of the art manufacturing facility and quality management system both meet ISO 9001:2008 standards. Each operation from assembly and test to cleaning, drying, and packaging is done in appropriately rated clean rooms. A sophisticated MRP system collects and processes real time data from manufacturing centers and inspection points. This allows variable and attribute data to be quickly and easily analyzed driving constant improvements in both quality and cost. Flow...