- Catalogs
- Crest Dutch Machinery
- Crest Datasheet TS-1600
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
Crest Datasheet TS-1600
Crest Datasheet TS-1600
- High laminating pressure up to 8 N/mm to prevent silvering on rough surfaces and UV prints.
- Speed setting of rollers and heat assist top roller.
- Heavy-duty unwind brake and windup friction-clutch for proper roll tension and windup.
- Adjustable nip pressure with LED bar readout.
- Rotatable control panel and foot pedal for Start/Stop.
- Chrome plated idle roll and ionization bar to eliminate static charge.
- Unpacked weight: 775 kg (TS-1600), 1350 kg (TS-2100).
- Dimensions: Depth 815mm/890mm, Width 2175mm/2710mm, Height 1530mm/1670mm.
- Voltage: 230 ac, 50/60Hz, 16A.
- Maximum speed: 15 m/min (49.2 ft/min).
- Material limits: Maximum width 1650mm/2150mm, Maximum thickness 50mm.
- Noise level: Less than 70 dB(A).
- Roller temperature: Standard 60°C, optional up to 150°C.
- Optical photocells and mechanical finger protection.
- Emergency stop button on all corners.
- Jog-mode with limited fixed speed for setup material.
- Specially developed for UV printed substrates to avoid silvering.
- High laminating pressure and selected rubber compound ensure perfect laminating quality.
- Robust industrial design with high-quality powder coating.
- Additional heating unit for bottom roller.
- Digital NIP-opening read-out and output table.
- Slitting system and length counter with digital read-out.
- End-of-roll detection with automatic stop.
- 3” to 6” core adapters and electrical roller height adjustment.
Catalog excerpts
HEAVY DUTY LAMINATOR HIGH PRESSURE LAMINATOR The Crest TS-1600 and TS-2100 are heavy duty laminators for applying protective overlaminate with heat and high pressure. They are built for digitally printed traffic signs on reflective sheeting, UV-printed graphics and decorative panels, and work with any UV-curable inkjet printer. Up to 8 N/mm of nip pressure and a specially selected rubber compound prevent silvering on rough surfaces and UV prints. The machine runs without compressed air and accepts board, sheet and roll material. FEATURES • Speed setting of the rollers • Heat assist top roller • Heavy duty unwind brake for web tension with combined wrinkle control • Heavy duty windup friction-clutch for proper roll windup • Adjustable nip pressure • Pressure readout by means of a LED bar • Rotatable control panel YOUR BENEFITS • High laminating pressure; • High output speed; • Maximum roll diameters up to 360mm (14”); • Robust heavy duty industrial design; • Extra strong unwind brakes and windup clutches. This machine can be customized • Foot pedal for Start/Stop • Chrome plated Idle roll top and bottom • Ionization bar to eliminate static charge [email protected] | www.crest.nl | +31 (0)572 345 050 Details are correct at time of publication. Crest Dutch Machiner y B.V. reserves the right to alter the specifications at any time.
Open the catalog to page 1
TECHNICAL SPECIFICATIONS Unpacked weight Depth Width Height Table height (optional) MAXIMUM SPEED ROLLER PRESSURE MATERIAL LIMITS Maximum width Maximum thickness SHAFT CAPACITIES Maximum unwind diameter 0 360mm (13.8”) Maximum roll weight 80kg NOISE LEVEL ROLLER TEMPERATURE Standard Roller temperature 60°C (Temp. sensor by contactless infrared sensor) PRESSURE ROLLERS 2, adjustable by handwheel (top roller heatable) WINDING POSITIONS Ix unwind with adjustable friction brake and wrinkle control Ix windup with adjustable friction clutch 4, with integrated measuring ruler (zero=0) at the middle...
Open the catalog to page 2All Crest Dutch Machinery catalogs and technical brochures
Archived catalogs
Crest Catalog 202519 Pages
- Cutting system
- Laser cutting machine
- Knife cutting system
- High-speed cut-off machine
- Plastic cutting machine
- Tube cutting system
- Precision cut-off machine
- Sheet cutting machine
- Rotary blade cutting center
- Large-format cutting machine
- Glass cutting machine
- Heavy-duty cutting machine
- Paper cutting machine
- Multi-head cutting machine
- Panel cutting machine
- Stacker
- PVC cutting center
- Single-phase cut-off machine
- Foam cutting machine
- Slitter