Cree® XLamp® XP-L LEDs XP-L High Density LED XP-L High Intensity LED PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS versions: High Density and High Intensity. white, 85 CRI white and 90-CRI white Flux Characteristics - XP-L High Density...3 • ANSI-compatible chromaticity bins Flux Characteristics-XP-L High Intensity .8 LED is the highest performing discrete in • Maximum drive current: 3000 mA Relative Flux vs. Junction Temperature.. 12 3.45 mm x 3.45 mm XP footprint. • Unlimited floor life at Relative Chromaticity vs. Temperature... 15 factor, enable lighting manufacturers • Electrically neutral thermal path Performance Groups - Luminous Flux... 17 lighting design, create smaller and less • UL® recognized component (E349212) Cree's Standard Chromaticity Regions lighting solutions that were previously ^^^^^^^^ Cree's Standard Cool White Kits Plotted not possible. ^^^^^^^^k on ANSI Standard Chromaticity The XLamp XP-L High Intensity (HI) LED Cree's Standard Warm and Neutral is the first of Cree's new class of High White Kits Plotted on ANSI Standard ^ new innovative primary optic design that radically reduces the optical source size Q: to deliver both lumens and intensity. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are Cree, Inc. registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 4600 Silicon Drive

Characteristics Characteristics Thermal resistance, junction to solder point Viewing angle (FWHM) - XP-L High Density Viewing angle (FWHM) - XP-L High Intensity Temperature coefficient of voltage ESD withstand voltage (HBM per Mil-Std-883D) Reverse voltage Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of

Flux Characteristics - XP-L High Density (TJ = 85 °C) The following table provides order codes for XLamp XP-L High Density LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 27). For definitions of the chromaticity kits, please see the Cree’s Standard Chromaticity Kits section (page 26). Minimum Luminous Flux (lm) @ 1050 mA Code Order Codes 65 CRI Typical Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the...

Flux Characteristics - XP-L High Density (TJ = 85 °C) - Continued Chromaticity Minimum Luminous Flux (lm) @ 1050 mA Order Codes Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 29). • Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified...

Flux Characteristics - XP-L High Density (TJ = 85 °C) - Continued Chromaticity Minimum Luminous Flux (lm) @ 1050 mA Order Codes Minimum Luminous Flux (lm) @ 1050 mA 80 CRI Typical Order Codes Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 29). • Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments...

Flux Characteristics - XP-L High Density (TJ = 85 °C) - Continued Chromaticity Minimum Luminous Flux (lm) @ 1050 mA Order Codes Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 29). • Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified...

Flux Characteristics - XP-L High Density (TJ = 85 °C) - Continued Chromaticity Minimum Luminous Flux (lm) @ 1050 mA Order Codes Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 29). • Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified...

Flux Characteristics - XP-L High Intensity (TJ = 85 °C) The following table provides order codes for XLamp XP-L High Intensity LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 27). For definitions of the chromaticity kits, please see the Cree’s Standard Chromaticity Kits section (page 26). Minimum Luminous Flux (lm) @ 1050 mA Order Codes Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section...

Flux Characteristics - XP-L High Intensity (TJ = 85 °C) - Continued Chromaticity Minimum Luminous Flux (lm) @ 1050 mA Order Codes Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 29). • Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified...