Cree® XLamp® XQ-E LEDs PRODUCT FAMILY DATA SHEET XQ-E High Density LEDs XQ-E High Intensity LEDs PRODUCT DESCRIPTION The XLamp® XQ-E LEDs are available • Cree’s smallest lighting class LED: in two versions: high density and high intensity. The XQ-E High Density Flux Characteristics - High Density White..3 Flux Characteristics - High Density Color...4 LED enables lighting manufacturers high‑intensity versions for design Flux Characteristics - High Intensity to significantly reduce the size and total cost of their LED luminaires versus similar performance 3.5‑mm royal blue, blue, PC blue, green, PC amber, red‑orange, red & high Relative Flux vs. Junction Temperature... 11 lumen output, efficacy or reliability. The • Maximum drive current: 1 A (high Flux Characteristics - High Intensity symmetry, consistent design across all density & high intensity) • Reflow solderable - JEDEC footprint simplifies manufacturing and design while providing excellent color mixing. • Unlimited floor life at ≤ 30 °C/85% RH • RoHS and REACh compliant The new XQ-E High Intensity LED uses an innovative primary optic design optimized to deliver maximum candela, especially through narrow‑beam secondary optics. Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

FLUX CHARACTERISTICS - HIGH DENSITY WHITE (T, = 85 °C) The following table provides several base order codes for XLamp XQ-E High Density white LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document. Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the...

FLUX CHARACTERISTICS - HIGH DENSITY COLOR (T, = 25 °C) The following tables provide several base order codes for XLamp XQ-E High Density color LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document. Dominant Wavelength Range Minimum Luminous Flux (Im) @ 350 mA linimnm I Mavimnm ' ' 'w Note • Cree maintains a tolerance of ±7% on flux and power measurements,...

FLUX CHARACTERISTICS - HIGH DENSITY COLOR (T, = 25 °C) - CONTINUED Color Dominant Wavelength Range Minimum Luminous Note • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 24). * Photosynthetic Photon Flux (PPF) values are calculated and for reference only. Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL®...

FLUX CHARACTERISTICS - HIGH INTENSITY WHITE (T, = 85 °C) The following table provides several base order codes for XLamp XQ-E High Intensity white LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document. Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See...

FLUX CHARACTERISTICS - HIGH INTENSITY COLOR (T, = 25 °C) The following tables provide several base order codes for XLamp XQ-E High Intensity color LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document. Note • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements....

FLUX CHARACTERISTICS - HIGH INTENSITY COLOR (T, = 25 °C) - CONTINUED Color Dominant Wavelength Range Minimum Luminous Flux (Im) @ 350 mA limmiim I Mpyimnm x ^ Note • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 24). * Photosynthetic Photon Flux (PPF) values are calculated and for reference only. Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®...

Relative Spectral Power RELATIVE SPECTRAL POWER DISTRIBUTION high density cool & neutral white from Copy of 161017 XQE NW_CW Spectra Data.xlsx High Density Relative Radiant Power Relative Spectral Power high density High Density Color Royal Blue Relative Radiant Power Blue Green Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.