PRODUCT FAMILY DATA SHEET Cree® XLamp® XP-L2 LEDs CLD-DS149 REV 0M performing high-density discrete white and 90-CRI white Flux Characteristics - EasyWhite® Order Cree's SC5 Technology® Platform, the • Binned at 85 °C Flux Characteristics - ANSI Order Codes and reliability of the XP-L LED in the • Wide viewing angle: 125° Relative Flux vs. Junction Temperature.. 10 differentiated solutions at lower system • Electrically neutral thermal path Relative Chromaticity vs. Temperature... 12 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC5 Technology® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or

CHARACTERISTICS Characteristics Thermal resistance, junction to solder point Viewing angle (FWHM) Temperature coefficient of voltage ESD withstand voltage (HBM per Mil-Std-883D) Reverse voltage Copyright © 2016-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC5 Technology® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product...

FLUX CHARACTERISTICS - EASYWHITE® ORDER CODES AND BINS (TJ = 85 °C) The following table provides order codes for XLamp XP-L2 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 20). For definitions of the chromaticity kits, please see the Cree’s Standard Chromaticity Kits section (page 20). Minimum Luminous Flux @1050 mA Flux (lm) @ 85 °C Order Code Order Code Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See...

FLUX CHARACTERISTICS - EASYWHITE® ORDER CODES AND BINS (TJ = 85 °C) - CONTINUED CRI Minimum Luminous Flux @1050 mA Order Code Order Code Order Code Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 22). • Cree XLamp XP-L2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin...

Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 22). • Cree XLamp XP-L2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2016-2019 Cree, Inc. All rights...

FLUX CHARACTERISTICS - ANSI ORDER CODES AND BINS (T, = 85 °C) The following table provides order codes for XLamp XP-L2 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 20). For definitions of the chromaticity kits, please see the Cree's Standard Chromaticity Kits section (page 20). Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 22). • Cree XLamp XP-L2 LED order codes specify...

FLUX CHARACTERISTICS - ANSI ORDER CODES AND BINS (T, = 85 °C) - CONTINUED DV Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 22). • Cree XLamp XP-L2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated...

Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 22). • Cree XLamp XP-L2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2016-2019 Cree, Inc. All rights...

Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 22). • Cree XLamp XP-L2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2016-2019 Cree, Inc. All rights...