Cree® XLamp® XP-E2 LEDs
43Pages

{{requestButtons}}

Catalog excerpts

Cree® XLamp® XP-E2 LEDs - 1

PRODUCT FAMILY DATA SHEET Cree® XLamp® XP-E2 LEDs PRODUCT DESCRIPTION The XLamp® XP-E2 LED builds on the unprecedented • Available in white, outdoor white, 80-CRI, 85-CRI, 90-CRI performance of the original XP-E by increasing lumen output up to 20% while providing a single die LED point source for precise white, royal blue, blue, green, PC amber, amber, red-orange, red, photo red & far red optical control. The XP‑E2 LED shares the same footprint as the • ANSI-compatible chromaticity bins original XP‑E, providing a seamless upgrade path to more lumens and/or greater efficiency while shortening the design cycle for • Maximum drive current: 1 A • Low thermal resistance: as low as 4 °C/W • Wide viewing angle: 110°-140° XLamp XP-E2 LEDs are the ideal choice for lighting applications • Unlimited floor life at ≤ 30 °C/85% RH where high light output and maximum efficacy are required, • Reflow solderable - JEDEC J‑STD‑020C compatible such as LED retrofit lamps, outdoor, portable, indoor directional, • Electrically neutral thermal path emergency vehicle or architectural. • RoHS and REACh compliant Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

Open the catalog to page 1
Cree® XLamp® XP-E2 LEDs - 2

Copyright © 2012-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademark

Open the catalog to page 2
Cree® XLamp® XP-E2 LEDs - 3

CHARACTERISTICS Characteristics Thermal resistance, junction to solder point - white Thermal resistance, junction to solder point - royal blue, blue Thermal resistance, junction to solder point - green Thermal resistance, junction to solder point - PC amber Thermal resistance, junction to solder point - amber Thermal resistance, junction to solder point - red-orange, red Thermal resistance, junction to solder point - photo red, far red Viewing angle (FWHM) - white Viewing angle (FWHM) - royal blue, blue, green Viewing angle (FWHM) - PC amber Viewing angle (FWHM) - amber, red-orange, red,...

Open the catalog to page 3
Cree® XLamp® XP-E2 LEDs - 4

FLUX CHARACTERISTICS - WHITE (TJ = 85 °C) The following tables provide order codes for XLamp XP-E2 white LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 37). For definitions of the chromaticity kits, please see the Cree’s Standard Chromaticity Kits section (page 36). Minimum Luminous Flux @ 350 mA Calculated Minimum Luminous Flux (lm)** @ 85 °C Order Codes Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the...

Open the catalog to page 4
Cree® XLamp® XP-E2 LEDs - 5

FLUX CHARACTERISTICS - WHITE (TJ = 85 °C) - CONTINUED Chromaticity Minimum Luminous Flux @ 350 mA Calculated Minimum Luminous Flux (lm)** @ 85 °C Order Codes Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 39). • Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin...

Open the catalog to page 5
Cree® XLamp® XP-E2 LEDs - 6

FLUX CHARACTERISTICS - WHITE (TJ = 85 °C) - CONTINUED Chromaticity Minimum Luminous Flux @ 350 mA Calculated Minimum Luminous Flux (lm)** @ 85 °C** Order Codes Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 39). • Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin...

Open the catalog to page 6
Cree® XLamp® XP-E2 LEDs - 7

FLUX CHARACTERISTICS - WHITE (TJ = 85 °C) - CONTINUED Chromaticity Minimum Luminous Flux @ 350 mA Calculated Minimum Luminous Flux (lm)** @ 85 °C** Order Codes Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 39). • Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin...

Open the catalog to page 7
Cree® XLamp® XP-E2 LEDs - 8

FLUX CHARACTERISTICS - WHITE (TJ = 85 °C) - CONTINUED Chromaticity Minimum Luminous Flux @ 350 mA Calculated Minimum Luminous Flux (lm)** @ 85 °C** Order Codes Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 39). • Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin...

Open the catalog to page 8
Cree® XLamp® XP-E2 LEDs - 9

FLUX CHARACTERISTICS - WHITE (TJ = 85 °C) - CONTINUED Chromaticity Minimum Luminous Flux @ 350 mA Calculated Minimum Luminous Flux (lm)** @ 85 °C** Order Codes Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 39). • Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin...

Open the catalog to page 9

All Cree catalogs and technical brochures

  1. CGH80030D

    5 Pages

  2. XLamp XP-L

    35 Pages

  3. CVFD20065A

    6 Pages

  4. XLamp ML-E

    27 Pages

  5. CXB Series

    2 Pages

  6. LED Lamps

    28 Pages

  7. T8 Series

    2 Pages

  8. CS Series

    10 Pages

  9. CR24 UPKIT

    1 Pages

  10. SL Series

    2 Pages

  11. WS Series

    2 Pages

  12. LS Series

    2 Pages

  13. XQ-B

    10 Pages

  14. XP-G2

    13 Pages

  15. XP-G

    12 Pages

  16. XP-E2

    17 Pages

  17. XP-E

    19 Pages

  18. XP-C

    17 Pages

  19. XM-L2

    12 Pages

  20. XM-L

    13 Pages

  21. XH-G

    11 Pages

  22. XH-B

    11 Pages

  23. XLamp XB-H LED

    12 Pages

  24. XLamp XB-D LED

    28 Pages

  25. MX-6S

    12 Pages

  26. XLamp ML-C

    19 Pages

  27. XLamp ML-B

    11 Pages

Archived catalogs