PRODUCT FAMILY DATA SHEET Cree® Screen Master® 5-mm Oval LED C5SMF-AJF/AJE PRODUCT DESCRIPTION The oval LED is specifically designed Color and Typical Dominant Wavelength:Amber (591nm) for variable-message signs and passenger-information shaped radiation pattern and high of -view outdoor applications where a Lead - Free wide viewing angle and readability in RoHS Compliant luminous intensity ensure that these devices are excellent for wide-field- Electronic Signs & Signals (ESS) Full Color video screen Motorway Signs Variable Message Sign (VMS) Advertising signs Petrol Signs These lamps are made with an advanced optical-grade epoxy that offers superior high-temperature and highmoisture-resistance performance in outdoor signal and sign applications. The encapsulation resin contains antiUV material in order to reduce the effects of long-term exposure to direct Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.

ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Items Forward Current Peak Forward Current Absolute Maximum Rating Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Lead Soldering Temperature Electrostatic Discharge Classification (MIL-STD-883E) Max. 260°C for 3 sec. max. (3 mm from the base of the epoxy bulb) Class 2 1. For long term performance the drive currents between 10mA and 30mA are recommended. Please contact CREE sales representative for more information on recommended drive conditions. 2. Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS...

INTENSITY BIN LIMIT (IF = 20 mA) Amber Bin Code • Tolerance of measurement of luminous intensity is ±15% COLOR BIN LIMIT (IF = 20 mA) Amber Bin Code • Tolerance of measurement of dominant wavelength is ±1 nm Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, In

ORDER CODE TABLE* Luminous Intensity (mcd) Color Dominant Wavelength Notes: 1. The above kit numbers represent order codes that include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each bulk. Single intensity-bin code and single color-bin codes will not be orderable. 2. Please refer to the “Cree LED Lamp Reliability Test Standards” document #1 for reliability test conditions. 3. Please refer to the “Cree LED Lamp Soldering & Handling” document #2 for information about how to use this LED product safely. #1: Refer to http://www.cree.com/led-components/media/documents/LED_Lamp_Reliability_Test_Standard.pdf...

          

MECHANICAL DIMENSIONS All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxy may be 0.5 mm max. C5SMF-AJF: NOTES Lead Frame Materials Ag-plated and Lead-free Solder-plated iron. RoHS Compliance The levels of RoHS-restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application in accordance with EU Directive 2011/65/EC (RoHS2), as implemented by EU member states on...

KIT NUMBER SYSTEM All dimensions in mm.Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: CCCCC - Product Series D - Color G - Option S : Standoff N : No Standoff B : Black Face W : White Face A : Black...

REFLOW SOLDERING The LED soldering specification is shown below(suitable for both leaded solder & lead-free solder): Manual Soldering Solder Dipping Soldering iron Preheat time Solder-bath temperature Soldering time Dipping time Not less than 3 mm from the base of the package. Not less than 3 mm from the base of the package. • Manual soldering onto the PCB is not recommended because soldering time is uncontrollable. • The recommended wave soldering is as below: 300 laminar wave Do not apply any stress to the LED package, particularly when heated. Only bottom preheat is suggested & should not...

PACKAGING Features: • • • • • The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shock during transportation. The boxes are not water resistant, and they must be kept away from water and moisture. The Bulk Pack types of packaging. Max 500 pcs per bulk and Max 2500 pcs per ammo. Bulk Pack Packaging Type: Ammo Pack Packaging Type: COLOR LED LAMP TYPE LXXXXXXXX-XXX JOWAXXXXX -XX-XXX Label (anti-electrostatic COLOR LED LAMP TYPE LXXXXXXXX-XXX JOWAXXXXX -XX-XXX Copyright © 2010 Cree, Inc. All...