Cree® PLCC2 1 in 1 SMD LED CLM3A-BKW/GKW
10Pages

{{requestButtons}}

Catalog excerpts

Cree® PLCC2 1 in 1 SMD LED CLM3A-BKW/GKW - 1

PRODUCT FAMILY DATA SHEET PRODUCT DESCRIPTION SMD LEDs is packaged in the industry standard package. These LEDs have • Color and Typical Dominant Wavelength: Blue (470nm) Green (525nm) high reliability performance and are designed to work under a wide range of environmental conditions. This high reliability feature makes them ideally suited to be used under illumination application conditions. Its wide viewing angle makes these APPLICATIONS • Channel Letter • Architectural Lighting • Luminous Intensity (mcd) CLM3A-BKW:(355 - 900) CLM3A-GKW:(1120 - 2240) • Lead-Free • RoHS Compliant LEDs ideally suited for channel letter, or general backlighting and illumination applications. The flat top emitting surface makes it easy for these LEDs to mate with light pipes. Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.

Open the catalog to page 1
Cree® PLCC2 1 in 1 SMD LED CLM3A-BKW/GKW - 2

CREEABSOLUTE MAXIMUM RATINGS (TA = 25°C) Items Cocyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.

Open the catalog to page 2
Cree® PLCC2 1 in 1 SMD LED CLM3A-BKW/GKW - 3

CREEINTENSITY BIN LIMIT (IF = 20 mA) Blue(CLM3A-BKW)_ Green (CLM3A-GKW) Bin Code Tolerance of measurement of luminous intensity is ±10%. Tolerance of measurement of dominant wavelength is ±1 nm. Cocyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.

Open the catalog to page 3
Cree® PLCC2 1 in 1 SMD LED CLM3A-BKW/GKW - 4

CREEORDER CODE TABLE* Color 1. The above kit numbers represent order codes that include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each bulk. Single intensity-bin code and single color-bin codes will not be orderable. 2. Please refer to the "Cree LED Lamp Reliability Test Standards" document #1 for reliability test conditions. 3. Please refer to the "Cree LED Lamp Soldering & Handling" document #2 for information about how to use this LED product safely. #1: Refer to...

Open the catalog to page 4
Cree® PLCC2 1 in 1 SMD LED CLM3A-BKW/GKW - 5

          

Open the catalog to page 5
Cree® PLCC2 1 in 1 SMD LED CLM3A-BKW/GKW - 6

MECHANICAL DIMENSIONS All dimensions are in mm. NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory...

Open the catalog to page 6
Cree® PLCC2 1 in 1 SMD LED CLM3A-BKW/GKW - 7

KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the...

Open the catalog to page 7
Cree® PLCC2 1 in 1 SMD LED CLM3A-BKW/GKW - 8

REFLOW SOLDERING The CLM3A-BKW GKW is rated as a MSL 5a product. The recommended floor life out of bag is 24hrs. The temperature profile is as below. Use all SMD besides LP6-NPP1-01-N1 Use only with CLM3A-BKW GKW Solder = Sn63-Pb37 Average ramp-up rate = 4ºC/s max. Average ramp-up rate = 4ºC/s max Preheat 120s max Preheat time = time = 100s Average ramp-up rate = 4ºC/s max Ramp-down rate = 6ºC/s = 6ºC/s Ramp-down rate max Peak temperature = 235ºC= 230ºC Peak temperature max Time within 5ºC of actual Peak Temperature = 10s max Time within 5ºC of actual Peak Temperature = 10s max. Duration...

Open the catalog to page 8
Cree® PLCC2 1 in 1 SMD LED CLM3A-BKW/GKW - 9

pick up SMD products during the process of SMT production . If handling is necessary, it should take careful to products are very small and the resin is still soft after solidification. Users are The packaging sizes of these SMDpick up these products. The following two methods are necessary : required to handle with care. Never touch the resin surface of SMD products. To avoid damaging the product’s surface and interior device, it is recommended to choose a special nozzle to pick up the SMD products during the process of SMT production. If handling is necessary, take special care when...

Open the catalog to page 9
Cree® PLCC2 1 in 1 SMD LED CLM3A-BKW/GKW - 10

The boxes are not water resistant and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Max 2500 pcs per reel. CARRIER TAPE PACKAGE MARKING COVER TAPE HUMIDITY INDICATOR HUMICHECK Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2019...

Open the catalog to page 10

All Cree catalogs and technical brochures

  1. CGH80030D

    5 Pages

  2. XLamp XP-L

    35 Pages

  3. CVFD20065A

    6 Pages

  4. XLamp ML-E

    27 Pages

  5. CXB Series

    2 Pages

  6. LED Lamps

    28 Pages

  7. T8 Series

    2 Pages

  8. CS Series

    10 Pages

  9. CR24 UPKIT

    1 Pages

  10. SL Series

    2 Pages

  11. WS Series

    2 Pages

  12. LS Series

    2 Pages

  13. XQ-B

    10 Pages

  14. XP-G2

    13 Pages

  15. XP-G

    12 Pages

  16. XP-E2

    17 Pages

  17. XP-E

    19 Pages

  18. XP-C

    17 Pages

  19. XM-L2

    12 Pages

  20. XM-L

    13 Pages

  21. XH-G

    11 Pages

  22. XH-B

    11 Pages

  23. XLamp XB-H LED

    12 Pages

  24. XLamp XB-D LED

    28 Pages

  25. MX-6S

    12 Pages

  26. XLamp ML-C

    19 Pages

  27. XLamp ML-B

    11 Pages

Archived catalogs