Cree Edge™ Series LED Security Wall Pack Luminaire Product Description The Cree Edge™ wall mount luminaire has a slim, low profile design. The luminaire end caps are made from rugged die cast aluminum with integral, weathertight LED driver compartments and high performance aluminum heat sinks specifically designed for LED applications. Housing is rugged aluminum. Includes a lightweight mounting box for installation over standard and mud ring single gang J-Boxes. Secures to wall with four 3/16" (5mm) screws (by others). Conduit entry from top, bottom, sides and rear. Allows mounting for uplight or downlight. Designed and approved for easy through-wiring. Includes leaf/debris guard. Applications: General area and security lighting Performance Summary Patented NanoOptic® Product Technology Made in the U.S.A. of U.S. and imported parts CRI: Minimum 70 CRI CCT: 4000K (+/- 300K), 5700K (+/- 500K) standard Limited Warranty+: 10 years on luminaire/10 years on Colorfast DeltaGuard® finish f See http://lighting.cree.com/warranty for warranty terms Field-installed Bird Spikes Hand-Held Remote XA-BRDSPK XA-SENSREM - For successful implementation of the programmable multi-level option, a minimum of one hand-held remote is required Ordering information Example: SEC-EDG-2M-WM-06-E-UL-SV-700 T (800) 236-6800 F (262) 504-5415 Rev. Date: V3 09/06/2017 Canada: www.cree.com/canada

Product Specifications CONSTRUCTION & MATERIALS • Slim, low profile design • Luminaire sides are rugged die cast aluminum with integral, weathertight LED driver compartment and high performance aluminum heat sinks specifically designed for LED applications • Housing is rugged aluminum • Furnished with low copper, light weight mounting box designed for installation over standard and mud ring single gang J-Boxes • Luminaire can also be direct mounted to a wall and surface wired • Secures to wall with four 3/16" (5mm) screws (by others) • Conduit entry from top, bottom, sides, and rear • Allows...

Photometry All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: http://lighting.cree.com/products/outdoor/wall-mount/cree-edge-series-5 2M Type II Medium Distribution * Initial delivered lumens at 25°C (77°F). Actual production yield may vary between -10 and +10% of initial delivered lumens ** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdf Type II Medium Distribution w/BLS...

Photometry All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: http://lighting.cree.com/products/outdoor/wall-mount/cree-edge-series-5 2S Type II Short Distribution * Initial delivered lumens at 25°C (77°F). Actual production yield may vary between -10 and +10% of initial delivered lumens ** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdf Type II Short Distribution w/BLS...

Photometry All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: http://lighting.cree.com/products/outdoor/wall-mount/cree-edge-series-5 3M Type III Medium Distribution * Initial delivered lumens at 25°C (77°F). Actual production yield may vary between -10 and +10% of initial delivered lumens ** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdf 3MB Type III Medium Distribution...

Photometry All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: http://lighting.cree.com/products/outdoor/wall-mount/cree-edge-series-5 4M Type IV Medium Distribution * Initial delivered lumens at 25°C (77°F). Actual production yield may vary between -10 and +10% of initial delivered lumens ** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdf * Initial delivered lumens at 25°C...