Cree Edge™ Series LED Area/Flood Luminaire Product Description The Cree Edge™ Series has a slim, low profile design. Its rugged cast aluminum housing minimizes wind load requirements and features an integral, weathertight LED driver compartment and high performance aluminum heat sinks. Various mounting choices: Adjustable Arm, Direct Arm, Direct Arm Long, or Side Arm (details on page 2). Includes a leaf/debris guard. Applications: Parking lots, walkways, campuses, car dealerships, office complexes, and internal roadways Performance Summary Patented NanoOptic® Product Technology Made in the U.S.A. of U.S. and imported parts CRI: Minimum 70 CRI CCT: 4000K (+/- 300K), 5700K (+/- 500K) standard Limited Warranty+: 10 years on luminaire/10 years on Colorfast DeltaGuard® finish f See http://lighting.cree.com/warranty for warranty terms Bird Spikes XA-BRDSPK Hand-Held Remote XA-SENSREM - For successful implementation of the programmable multi-level option, a minimum of one hand-held remote is required Backlight Control Shields XA-20BLS-4 - Four-pack - Unpainted stainless steel Ordering Information AA/DL/SA Mount - see page 22 for weight & dimensions Color Drive Options Current AA Adjustable Arm DA Direct Arm DL Direct Long Arm AA Adjustable Arm SA Side Arm - Available with 20-60 LEDs DIM 0-10V Dimming - Control by others - Refer to Dimming spec sheet for details - Can't exceed specified drive current F Fuse - Refer to ML spec sheet for availability with ML options - Available with UL voltage only - Available for U.S. applications only - When code dictates fusing, use time delay fuse HL Hi/Low (Dual Circuit Input) - Refer to HL spec sheet for details - Sensor not included ML Multi-Level - Refer to ML spec sheet for details - Intended for downlight applications at 0° tilt P Photocell - Refer to ML spec sheet for availability with ML options - Available with UL voltage only PML Programmable Multi-Level, 20-40' Mounting Height - Refer to PML spec sheet for details - Intended for downlight applications at 0° tilt PML2 Programmable Multi-Level, 10-30' Mounting Height - Refer to PML spec sheet for details - Intended for downlight applications at 0° tilt R NEMA® Photocell Receptacle - Intended for downlight applications with maximum 45° tilt - Photocell by others - Refer to ML spec sheet for availability with ML options 40K 4000K Color Temperature - Minimum 70 CRI - Color temperature per luminaire * Reference EPA and pole configuration suitability data beginning on page 19 NOTE: Price adder may apply depending on configuration US: lighting.cree.com T (800) 236-6800 F (262) 504-5415 Rev. Date: V6 12/07/2017 Canada: www.cree.com/canada CREEt:T (800) 473-1234 F (800) 890-7507

Product Specifications CONSTRUCTION & MATERIALS • Slim, low profile, minimizing wind load requirements • Luminaire sides are rugged die cast aluminum with integral, weathertight LED driver compartment and high performance heat sinks • DA and DL mount utilizes convenient interlocking mounting method. Mounting is rugged die cast aluminum, mounts to 3-6" (76-152mm) square or round pole and secures to pole with 5/16-18 UNC bolts spaced on 2" (51mm) centers • AA and SA mounts are rugged die cast aluminum and mount to 2" (51mm) IP, 2.375" (60mm) O.D. tenons • Includes leaf/debris guard • Exclusive...

Cree Edge™ LED Area/Flood Luminaire Photometry All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: http://lighting.cree.com/products/outdoor/area/cree-edge-series-1 2M 150˚ Type II Medium Distribution CURB LINE Position of vertical plane of maximum candlepower. Candlepower Trace: Vertical plane through horizontal angle of maximum candlepower. CSA Test Report #: 6371 ARE-EDG-2M-**-06-E-UL-700-40K Initial Delivered Lumens: 10,985 Initial Delivered Lumens* Initial Delivered Lumens*...

Photometry All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: http://lighting.cree.com/products/outdoor/area/cree-edge-series-1 2MB Type II Medium Distribution w/BLS * Initial delivered lumens at 25°C (77°F). Actual production yield may vary between -10 and +10% of initial delivered lumens ** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdf Canada: www.cree.com/canada CREE^r...

Cree Edge™ LED Area/Flood Luminaire Photometry All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: http://lighting.cree.com/products/outdoor/area/cree-edge-series-1 2MP 150˚ Type II Medium Distribution w/Partial BLS Position of vertical plane of maximum candlepower. Candlepower Trace: Vertical plane through horizontal angle of maximum candlepower. 30º CSA Test Report #: 6361 ARE-EDG-2MP-**-06-E-UL-700-40K Initial Delivered Lumens: 9,912 CURB LINE Initial Delivered Lumens* Initial...

Photometry All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: http://lighting.cree.com/products/outdoor/area/cree-edge-series-1 3M Type III Medium Distribution * Initial delivered lumens at 25°C (77°F). Actual production yield may vary between -10 and +10% of initial delivered lumens ** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdf

Photometry All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: http://lighting.cree.com/products/outdoor/area/cree-edge-series-1 3MB Type III Medium Distribution w/BLS * Initial delivered lumens at 25°C (77°F). Actual production yield may vary between -10 and +10% of initial delivered lumens ** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdf