Catalogs >
Cree >
Cree® 5-mm Blue and Green Round LED

Cree® 5-mm Blue and Green Round LED
9Pages

Catalog excerpts

PRODUCT FAMILY DATA SHEET Cree® 5-mm Blue and Green Round LED C503B-BCS/BCN-030 C503B-GCS/GCN-030 PRODUCT DESCRIPTION Round LEDs offer superior light out- Color and Typical Dominant Wavelength: Blue (470nm) Green(527nm) put for excellent readability in sunlight and dependable performance. They provide extremely stable light output over long periods of time. • These lamps are made with an advanced optical-grade epoxy offering superior high-temperature and highmoisture-resistance performance in Motorway Signs Variable Message Sign (VMS) Advertising signs Petrol Signs Viewing angle: C503B-BCS/BCN/GCS/GCN-030: 30 degree minimum Lead - Free outdoor signal and sign applications. Electronic Signs & Signals RoHS Compliant Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313

Open the catalog to page 1

ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Items Absolute Maximum Rating Blue/Green Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Lead Soldering Temperature Peak Forward Current Max. 260°C for 3 sec. max. (3 mm from the base of the epoxy bulb) 1. Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (T A = 25°C) Characteristics Forward Voltage Reverse Current Dominant Wavelength Luminous Intensity 50% Power Angle Note: Continuous reverse voltage can cause LED damage. Copyright © 2010 Cree, Inc. All rights reserved. The...

Open the catalog to page 2

INTENSITY BIN LIMIT (IF = 20 mA) Blue C503B-BCS/BCN-030 (30 degree min) Bin Code U0 Green C503B-GCS/GCN-030 (30 degree min) Bin Code • Tolerance of measurement of luminous intensity is ±15% COLOR BIN LIMIT (IF = 20 mA) Blue Bin Code Green Max.(nm) • Tolerance of measurement of dominant wavelength is ±1 nm Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without...

Open the catalog to page 3

ORDER CODE TABLE* Blue (30 degree min) Color Viewing Angle Dominant Wavelength Green (30 degree min) Color Viewing Angle Dominant Wavelength Notes: 1. The above kit numbers represent order codes that include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each bulk. Single intensity-bin code and single color-bin codes will not be orderable. 2. Please refer to the “Cree LED Lamp Reliability Test Standards” document #1 for reliability test conditions. 3. Please refer to the “Cree LED Lamp Soldering & Handling” document #2 for...

Open the catalog to page 4

GRAPHS            

Open the catalog to page 5

MECHANICAL DIMENSIONS All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxy may be 0.5 mm max. C503B-BCS/GCS-030: NOTES RoHS Compliance The levels of RoHS-restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application in accordance with EU Directive 2011/65/EC (RoHS2), as implemented by EU member states on January 2, 2013 and amended on March 31, 2015 by EU...

Open the catalog to page 6

KIT NUMBER SYSTEM All dimensions in mm.Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without...

Open the catalog to page 7

REFLOW SOLDERING The LED soldering specification is shown below(suitable for both leaded solder & lead-free solder): Manual Soldering Solder Dipping Soldering iron Preheat time Solder-bath temperature Soldering time Dipping time Not less than 3 mm from the base of the package. Not less than 3 mm from the base of the package. • Manual soldering onto the PCB is not recommended because soldering time is uncontrollable. • The recommended wave soldering is as below: 300 laminar wave Do not apply any stress to the LED package, particularly when heated. Only bottom preheat is suggested & should...

Open the catalog to page 8

PACKAGING Features: • • • • • The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shock during transportation. The boxes are not water resistant, and they must be kept away from water and moisture. The Bulk Pack types of packaging. Max 500 pcs per bulk and Max 2500 pcs per ammo. Bulk Pack Packaging Type: Ammo Pack Packaging Type: COLOR LED LAMP TYPE LXXXXXXXX-XXX JOWAXXXXX -XX-XXX Label (anti-electrostatic Copyright © 2010 Cree, Inc. All rights reserved. The information in this document...

Open the catalog to page 9