1. Catalogs
  2. CreatorOptics
  3. CreatorOptics Rod Lenses

CreatorOptics Rod Lenses

CreatorOptics Rod Lenses

Product catalog summary
Rod Lens Specifications:
  • Diameter: Ranges from 1mm to 15mm, customizable options available.
  • Diameter Tolerance: Up to +/-0.005mm.
  • Length: Ranges from 1mm to 150mm, customizable options available.
  • Length Tolerance: +/-0.1mm.
  • Surface Quality: 40/20 for ends, 60/40 for cylinder, 80/50 for chamfer.
  • Surface Accuracy: Up to 1/10 lambda @ 633nm.
  • Pyramidal: Less than 1/1000.
  • Parallelism of End Surfaces: 3 arc minutes.
  • Perpendicularity: +/-0.1.
  • Material Options: Sapphire, UV Fused Silica, BK7 glass, or other customizable materials.
Ball Lens and Half-ball Lens Specifications:
  • Material Options: BK7, Sapphire, Fused Silica, Ruby, LASFN7.
  • Surface Quality: Options of 80/50, 60/40, 40/20.
  • Diameter Tolerance: +/-0.0025mm.
  • Ellipticity: Less than 0.0025mm.
  • Coating: None.
Contact Information:
See more

Catalog excerpts

CreatorOptics Rod Lenses-1

Ball Lens ‘Common Specifications of Rod Lens or optical Rods: Diameter: from Dialmm to Dia15mm, customize available Diameter tolerance: up to +/-0.005mm Length: from 1mm to 150mm, customize available Length tolerance: +/-0. 1 mm Surface Quality: 40/20 for ends, 60/40 for cylinder, 80/50 for chamfer Surface Accuracy: up to 1/10 lambda @ 633nm Pyramidal: < 1/1000 Parallelism of two end surface: 3 arc min Perpendicularity: +/-0.1 Material: Sapphire, UV Fused Silica, BK7 glass or other material are customize available. Material: BK7, Sapphire, Fused Silica, Ruby, LASFN7 Surface Quality: 80/50, 60/40, 40/20 ' Diameter tolerance:+/-0.0025mm Ellipticity: <0.0025mm Coating: None Material: BK7, Sapphire, Fused Silica, Ruby, LASFN7 Surface Quality: 80/50, 60/40, 40/20 ' Diameter tolerance:+/-0.0025mm Ellipticity: <0.0025mm Coating: None

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.