
What about if existing remote controls transmit a rolling code? You can use the combination of our multi-frequency duplicators and receivers. In the next example, the goal is to control everything with a single remote control. 2 automations works at 868 MHz, 1 at 27 MHz, and a main door should be connected to our multi-frequency door opener: 868MHz was chosen to control everything using the fixed code remote control at 868MHz, that can also be copied on our duplicator. Multi-frequency door opener connected to the electric strike plate: open the main door.by almost any remote control! Universal receiver can be used to control automations that use rolling codes or other frequencies. Supports fixed and rolling codes! Multi-frequency duplicator can copy fixed code remote controls Copy up to 4 original remote controls even if they transmit in different frequencies Doorbell switch External light Door bell 2-3ch transmitter The transmitter is internally supplied by a 3V cell, so it can be easily connected to the doorbell switch without the need for external supply. 2ch receiver outputs can be configured to be activated by the same transmitter (doorbell switch): one output activates the door chime and the other output activates the light for 1 minute or more. Application Notes Remote control duplicators Transmitters Receivers Automatically learn frequency and code transmitted by existing remote controls. NO need for external programmers or frequency counters: very easy copying procedure with bi-color LED. 4 independent buttons: it's possible to copy up to 4 remote controls, for example: Hoermann HSM4 @868MHz on button 1 Marantec D302 @433MHz on buttons 2 FAAC TM315 @315MHz on button 3 Linear Multicode @300MHz on button 4 Door opener Multi-frequency remote control duplicator Quality made in Europe 4 independent buttons, all transmitting at 433.92 MHz Easy programming, thanks to the bi-color LED 12V battery (type 27A) Long range, up to 500m Long Range It's possible to control everything using the existing fixed code remote control. It's also possible to copy it on our multi-frequency duplicator, which is less expensive and has a nice look! Multi-frequency remote control duplicator 433.92, 868.3, 286÷418 MHz High quality - Made in Europe Need to integrate different remote controls into a single one, even if transmission frequency is different? No problem: if remote controls transmit a fixed code, you can use our multi-frequency remote controls and transmitters. Door opener Long range 433.92MHz remote control duplicator 1ch transmitter/duplicator 2-3 channels transmitter/duplicator with power cut (blackout) detector
Open the catalog to page 1External switch Door opener: activates an electric lock or strike plate by pressing a button on key fob Frequency: 433.92, 868.3, selectable by the installer Switch current: 3.2Aac max Supply: 9÷18Vac Frequency selectable by the Prog button: 433.92, 868.3, 300, 315MHz, ... Externally supplied at 7÷35Vdc or 5÷24Vac Transmission power selectable, from 10μW to 10mW - External voltage to be + monitored: 9÷24Vdc Channel 1: switch1 is closed Channel 2: switch2 is closed Channel 3: both switch1 and switch2 are closed Channel 4: external voltage falls down from V>=9Vdc to V<1Vdc Can be used to convert...
Open the catalog to page 21 Page
2 Pages
3 Pages
22 Pages