1. Catalogs
  2. Creasol
  3. CreasolCatalog

CreasolCatalog

CreasolCatalog
1 / 22 PagesView full catalog

CreasolCatalog

Product catalog summary
Product Overview
Creasol specializes in smart electronic devices focusing on reliability and energy efficiency. Their product range includes home automation modules, remote control duplicators, multi-frequency receivers, and electric lock door openers.
Domotica Modules
These modules are designed for high reliability with wired connections, low power consumption, and no RF pollution. They support DomBus for low latency and Modbus for broader compatibility, allowing direct communication for simple automations and integration with various home automation systems.
DomBusEVSE - Electric Vehicle Charging Controller
This controller is suitable for DIY smart wallboxes and simple AC charging stations, featuring load balancing, solar power usage, and grid power regulation. It offers dynamic current limiting and voltage management.
DomBusTracker2 - Sun Tracker Controller
Designed for solar trackers, this controller integrates with home automation systems and includes a sun light sensor, wind sensor input, and manual control options. It is compact and energy-efficient.
DomBusTH - Temperature/Humidity/Touch Sensor Board
This indoor sensor board measures temperature and humidity, manages alarm sensors, and includes a multifunctional touch sensor with low power consumption.
DomBus12 - Compact Inputs/Outputs Module
Suitable for managing alarm sensors, greenhouse environments, and climate systems, it supports various input configurations and has low power consumption.
DomBus21 - High Power Loads Control
This module controls high power loads and manages meters, featuring latching relays for zero consumption, compactness, and energy efficiency.
DomBus23 - Versatile Control Module
Used for dimming LED strips, managing gates, and converting doorbells, it includes relay outputs, mosfet output, and configurable I/O lines.
DomBus31 - Relay Management Module
Designed for managing devices with multiple digital inputs, this module includes relay outputs with overvoltage protection and low power consumption.
DomBus32/33 - Light and Load Management
These modules manage lights, valves, and loads with configurable I/O and AC inputs. DomBus33 is optimized for light systems with step-by-step relays.
DomBus36 - Relay Management Module
Features 12 relay outputs for managing devices with digital inputs and includes overvoltage protection.
DomBus37/38 - Input and Relay Modules
Support alarm systems, greenhouses, and monitoring applications with configurable inputs and relays, with DomBus38 offering additional relays for more extensive control.
Additional Products
DomESP1 Board: Compatible with NodeMCU ESP8266, featuring relays, mosfets, and analog inputs, suitable for gate openers and light dimmers.
Remote Control Duplicators: Copy up to 4 remote controls, with multifrequency support for the EU market.
Universal Multi-frequency Receivers: Replace or add receivers to electronic boards, supporting fixed and rolling code remote controls.
Electric Lock Door Opener: Opens gates and doors via remote control, with multifrequency support and quick installation.
Sender - 4 Channels Transmitter: Configurable for different frequencies and modes, suitable for vehicle and wireless extension applications.
Environmental Note
Products are printed on recycled paper and powered by renewable energy sources.
See more

Catalog excerpts

CreasolCatalog-1

Product Catalog + Home/building automation + Remote control duplicators + Multifrequency receivers + Electric lock door openers We develop smart electronic devices with reliability and energy efficiency in mind Updated version of this catalog, with links, at www.creasol.it/catalog

 Open the catalog to page 1
CreasolCatalog-2

Domotica Modules for building automation systems Our modules are designed for: • High reliability (wired connection, like KNX®, using the RS485 industrialgrade balanced bus) • Very low power consumption (typ. 15mW standby, +75mW for any additional relay!!) • No battery, no RF pollution • Supporting two different protocols of your choice: DomBus: proprietary, low latency, working with Domoticz, Home Assistant, NodeRED and any system supporting MQTT (AutoDiscovery is supported!) Modbus: standard protocol, working with almost any system, but not suitable for low latency systems • Supporting commands...

 Open the catalog to page 2
CreasolCatalog-3

Domotic product selection DomBus: why a WIRED BUS?? Energy, latency, security, reliability! Although it may seem anachronistic to have home automation modules connected via a bus instead of wirelessly, wired bus has several advantages: * The bus also provides power supply » greater efficiency, working during power outage when using a 12V backup battery, no need to connect 230V to each module * 100% local, no internet connection required » greater security * Low latency, no radio interference, no RF pollution, no RF jamming, no batteries The bus uses a standard alarm cable, 4x0.22mm², a very thin...

 Open the catalog to page 3
CreasolCatalog-4

DomBusEVSE Electric vehicle charging controller Applications: •Full feature Mode3 7.3kW (single phase) or 22kW (three phase) DIY smart wallbox with load balancing, using only solar power or adding extra power from the grid •Very simple and cheap standalone AC charging station for electric vehicles, charging at fixed rate: 25%, 50%, 75%, 100% of max available power, without needing for an home automation system •Managed mode: charging current (power) set by an automation in the home automation system Features: •Checking power from the grid, to regulate charging power preventing disconnections,...

 Open the catalog to page 4
CreasolCatalog-5

DomBusTracker2 Single/Dual axis sun tracker controller Applications: •Single (tilt or horizontal) or Dual axis solar tracker, standalone, with the ability to be monitored and controlled by a home automation system Features: •Deep hole sun light sensor, that works good even when it's cloudy •Automatically detects when motor goes OFF by internal limit switches (useful for linear actuators) •Optional external limit switches or proximity sensors •Wind sensor input, for reed anemomenter: put tracker in safe position when wind speed above a configurable threshold; wind speed may be set by the home...

 Open the catalog to page 5
CreasolCatalog-6

•Indoor room sensor for temperature and relative humidity: must be mounted on a blank cover with a 4mm hole in the middle to permit air exchaging (to measure humidity) • Alarm sensors (magnetic contact sensors, PIRs, ...) management with RGW led for status notification • Up/Down roller shutter control, by using the external relay module DomRelay2 to activate the motor •Multi-function virtual button (touch sensor) with buzzer notification •Temperature and relative humidity sensor • Touch sensor, to get a multi-functions button: if a piezo buzzer is connected between IN3 and IN4, by touching the...

 Open the catalog to page 6
CreasolCatalog-7

Applications: • Alarm sensors management: up to 9 sensors, up to 7 double/triple biased alarm sensors • Greenhouse: up to 7 temperature NTC sensors management and 2 outputs (DomRelay2 external relays) to activate fan and heater • Climate/boiler management: 2 outputs (external relays), up to 7 NTC sensors to measure water pipes temperature • Tank level measurement, using ultrasonic distance sensor • Meters management: up to 9 meters/counters with pulsed output Features: •IO1+4 and IO7+9 configured as inputs, with or without 10k pullup, can be connected to buttons/ switches, up/down buttons, counters,...

 Open the catalog to page 7
CreasolCatalog-8

Applications: • High power loads control: can enable loads up to 3kW (15A) • Disabling loads that remains off for long periods, reducing stand-by energy consumption, like heat pumps, boilers, gate and garage door (it's good to disable when alarm is on) •Battery powered device controlling external loads: it uses| latching relays, that consume nothing when on or off • Meters management: up to 4 meters/counters with pulsed output • 3x 15A SPST relays with latching coil (zero consumption) • 1x optoisolated AC input, 100-250V, that is used for two functions: zero-crossing detector + voltage presence...

 Open the catalog to page 8
CreasolCatalog-9

DomBus23 2 relays, 1 mosfet, 2 0÷10V out, 2 I/O, 3 AC in Applications: •Led strip dimmer, 12/24V, 10A max •2 external dimmers management by using the 0÷10V analog outputs •Gate or garage door management: relays and optoisolated inputs to know the gate status. Open the gate or garage door from the smartphone •Converting a door bell in a smart door bell Features: •2x relay outputs, 250Vac 5A •1x mosfet output, 30V 10A max, with both digital and dimmer functions •2x 010V analog outputs: they can also be configured as opendrain output (available by the optional cable) •2x I/O lines, each one can...

 Open the catalog to page 9
CreasolCatalog-10

Applications: •Management of devices with many digital inputs (like heatpump, ventilation system, ...) • Zone valves activation in heating/cooling systems • Lights and sockets activation • 6x relay outputs, 250Vac 5A, with NO contact • 2x relay outputs, 250Vac 10A, with NO and NC contacts •Relays are divided in 3 blocks, respecting creepage distance between blocks •Overvoltage and inrush current protection • Low power: 15mW in standby, 600mW with all 8 relays on •DCMD commands support (on DomBus firmware) coil or radiant system -Dehumidification On/Off - Integration coil On/Off PUmP with

 Open the catalog to page 10
CreasolCatalog-11

DomBus32 DomBus33 3 relays, 3 AC inputs, 5 I/Os Applications: •Lights, valves and loads management •230V presence and blackout detection •Aux supports for 5 pushbuttons, meters, alarm and temperature sensors Features: •3x relay outputs, 250Vac 5A, with NO contact •3x AC inputs for 100÷250V detection (power outage, and check that critical appliances are really supplied, like fridge and heatpump) •Relay outputs and AC inputs share the same common terminal block (neutral or line) for easy and quick wiring •5x configurable I/O that can be connected to pushbuttons/switches, counters/meters, NTC thermal...

 Open the catalog to page 11

All Creasol catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.