*mydirectindustry

Catalogs
CRE TECHNOLOGY
product applications en a2020

product applications en a2020

Product catalog summary

Overview: This document provides an overview of CRE Technology's product applications, focusing on control modules for generator sets (gensets). It outlines the requirements and compatible modules for various applications, ranging from simple start/stop control to complex configurations involving multiple gensets and mains.

Product Applications:

Basic Control: Applications requiring start/stop control and engine protections without breaker, voltage, or speed control. Compatible modules include MDM, MDA, ACGEN 2.0, and AMF COMPACT.
Intermediate Control: Applications with breaker control but no voltage or speed control. Compatible with ACGEN 2.0 and AMF COMPACT.
Advanced Control: Applications requiring auto transfer switch and breaker control, compatible with MNS and ICGEN 2.0.
Paralleling Mode: Standby generators with synchronization and load sharing capabilities. Compatible with GENSYS COMPACT PRIME and GENSYS 2.0.
Mains Paralleling: Applications involving mains paralleling, requiring synchronization, load sharing, and power management. Compatible with GENSYS COMPACT MAINS and GENSYS 2.0.

Complex Configurations:

Multiple Gensets: Applications with multiple gensets and mains, requiring modules like GENSYS COMPACT PRIME, MASTER COMPACT, and BTB COMPACT.
H Configuration: Involves bus tie breakers and multiple mains, necessitating specific module combinations for effective management.

Key Recommendations: For direct connection applications with multiple mains, it is essential to use two breakers and a MASTER COMPACT controller. A single breaker with a MASTER COMPACT 1B controller is insufficient for managing all sequences.

Catalog excerpts

product Applications CRE TECHNOLOGY - 130, allée Charles-Victor Naudin - Zone des Templiers - SOPHIA ANTIPOLIS - 06410 BIOT - FRANCE Phone: + 33 (0)4 .92.38.86.82 - www.cretechnology.com - [email protected] PRODUCT APPLICATIONS _EN_A2020

Open the catalog to page 1

WHAT PRODUCTS FOR WHICH APPLICATION? ALL PRODUCT OVERVIEW APPLICATION EXAMPLE: Single genset without breaker: key start or auto start controller APPLICATION EXAMPLE: Single genset with 1 generator breaker: auto start controller Start/Stop control Engine protections No breaker control No voltage control No speed control Start/Stop control Engine protections Breaker control No voltage control No speed control Application compatible with the following modules (from low costs to highend product): MDM MDA ACGEN 2.0 AMF COMPACT (Auto Start Module) Application compatible with the following modules (from...

Open the catalog to page 2

RODUCTS FOR HICH APPLICATIONPCOMPACT PRODUCTS OVERVIEW APPLICATION EXAMPLE: Multiple gensets paralleled with 1 Mains / 2 Breakers MODULES NEEDED: • 2 GENSYS COMPACT PRIME APPLICATION EXAMPLE: Multiple gensets paralleled with 1 Mains/1 Breaker MODULES NEEDED: • 2 GENSYS COMPACT PRIME APPLICATION EXAMPLE: Multiple gensets paralleled with multiple Mains MODULES NEEDED: • 2 GENSYS COMPACT PRIME APPLICATION EXAMPLE: H Configuration with bus Tie Breaker and Mains 2 Breakers MODULES NEEDED: • 2 GENSYS COMPACT PRIME APPLICATION EXAMPLE: H Configuration with bus Tie Breaker and Mains 1 Breaker MODULES...

Open the catalog to page 3

SEGMENT 1 SEGMENT 2 SEGMENT 3 MODULE For direct connection multiple mains application, it is mandatory to use 2 breakers and MASTER COMPACT controller. One breaker and MASTER COMPACT 1B controller will not allow to manage all sequences.

Open the catalog to page 4

All CRE TECHNOLOGY catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list