*mydirectindustry

Catalogs
CRE TECHNOLOGY
ICGEN 2.0 SALES DOCUMENTATION

ICGEN 2.0 SALES DOCUMENTATION

Product catalog summary

Overview: The ICGEN 2.0 is an auto transfer switch controller designed for a single generating set operating in standby mode. It monitors mains parameters and initiates a remote start signal to the generator upon failure. When mains power is restored, it switches the load back and stops the generator after a cooling period.

Features:

Back-lit LCD display with multiple information pages and help button.
26 configurable alarms and protections with high accuracy TRMS measurement.
Real-time clock with battery and multilingual support (English, French, Italian).
System statistics for alternator and mains, easy setup, and Modbus communication.

Characteristics:

DC range: 8 to 32 VDC / AC supply range: 50 to 500 VAC.
Standby current: 100 mADC; Operating current: 350 mADC.
Relay outputs for generator and mains breaker: 8 A / 250V.
DC outputs: 6 A /28V and 2 A/28V.
Voltage dropouts immunity: 0V for 200ms.

Ports: 1 RS232 & 1 RS485 port for Modbus RTU communication.

Environment:

Operating temperature: -30°C to +70°C.
Maximum humidity: 95% non-condensing.

Dimensions and Weight:

Dimensions: 245x182x40mm; Panel cut-out: 220x160 mm minimum.
Weight: 750 gr.

Certifications: EN61000-6-(2), (4), EN60086-2-2, IEC61000-4-(2), (3), (4), (5), (6), IEC60086-2-(1), (2), (6), IEC60086-2-30, CISPR 16-1.

Protections:

Ground protection alarm, battery maintenance, faulty mains, and emergency button.
Feedback KG/KR, system lock, faulty start, low/high frequency and voltage generator.
Current overload, short-circuit, wrong phase sequence, user alarms.

Measurements:

Generator: VAC, kVA, kW, kVAR, kWh, cos (φ), frequency, run hours.
Load: Currents L1-L2-L3.
Mains: VAC, kVA, kW, kVAR, kWh, cos (φ), frequency.

Additional Features: Remote and manual start/stop, graphic remote display, programmable inputs/outputs, generator and mains protections, front panel protection: IP65.

Catalog excerpts

rator control auto transfer switch ICGEN2.0Auto transfer switch PART NUMBER A63Z2 ASSOCIATED PRODUCTS TCGEN2.0 ACGEN2.0 CRE Monitor (Configuration software) The ICGEN 2.0 is a complete auto transfer switch controller with remote start/stop for a single generating set operating in standby mode. All mains parameters are checked and in case of failure, the controller will provide a remote start signal to the generator. When the mains reappear, the ICGEN 2.0 opens the genset breaker, switches back the load on the mains and stops the generator after a programmable cooling time. ICGEN2.0 FEATURES: • Back-lit LCD graphic display with multiple information pages, help button for on-board instructions, multiple password access • 26 configurable alarms and protections, high accuracy TRMS measurement • Date and time (real time clock with battery), • 3 languages available on board (English, French, Italian) • System statistics: alternator and mains • Fast & easy setup, 250 engine history events log, Modbus communication

Open the catalog to page 1

All CRE TECHNOLOGY catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list