*mydirectindustry

Catalogs
CRE TECHNOLOGY
generator-control

generator-control

Product catalog summary

Introduction
CRE TECHNOLOGY provides advanced generator control solutions designed to enhance control and monitoring capabilities for various generator applications. Their offerings include microprocessor modules, auto start controllers, and remote display systems.

Modules
CRE TECHNOLOGY offers three basic microprocessor modules for generator control, each with specific functionalities:

MDM: Manual start control unit with keyswitch.
MDA: Auto start control unit with keyswitch.
MNS: Auto transfer switch control unit with three-phase mains voltage detection.

These modules support voltage inputs from 15 to 300VAC and operate at a nominal frequency of 50-60 Hz.

Advanced Modules
Two additional modules, ACGEN 2.0 and ICGEN 2.0, offer enhanced programmability and features:

ACGEN 2.0: Auto start controller with remote start/stop, J1939 CANbus communication, and generator protection.
ICGEN 2.0: Auto transfer switch controller with mains fault detection and breaker management.

AMF COMPACT
The AMF COMPACT is designed for standby diesel or gas gensets, providing automatic transfer switch management and comprehensive monitoring and protection features. It supports:

Multiple starter management.
Warmup and cooldown at idle or nominal speed.
Remote start and test modes.

Configuration is possible via front panel, remote touchscreen, or i4Gen Suite PC software.

i4Gen Color Touchscreen HMI
The i4Gen range offers multi-touch screen displays for harsh environments, enabling control, measurement, and configuration of generator systems. Key features include:

Remote access via ZOHO Assist for up to 10,000 units.
Email notifications for configurable events.
Display of single-line diagrams and production curves.

Available in 7”, 10”, and 15” sizes.

Remote Display & Control
i4Gen HMI provides remote management capabilities with embedded WIFI, 3G/4G modem, and WAN port. It supports email notifications and remote access via PC or mobile devices.

RDM 1.0 - Alarm Annunciator
The RDM 1.0 is an 8-channel alarm annunciator module, offering:

Front face and dip switch configuration.
Power supply from 19-150VDC.
ModBus RTU-RS485 communication.

PC Software
EasyFlex: Allows customization of internal logical sequences with up to 50 lines of equations and 100 user variables.
i4Gen Suite: A user-friendly software for real-time configuration and monitoring of power plant modules, with automatic firmware updates.

Contact Information
For support, contact CRE TECHNOLOGY via email, Skype, or phone.

Catalog excerpts

GENERATORs CONTROL SOLUTIONS CRE TECHNOLOGY - 130, allée Charles-Victor Naudin - Zone des Templiers - SOPHIA ANTIPOLIS - 06410 BIOT - FRANCE Phone: + 33 (0)4 .92.38.86.82 - www.cretechnology.com - [email protected]

Open the catalog to page 1

GENERATOR CONTROL SOLUTIONS Innovation for better control MODULES basic units CRE TECHNOLOGY offers 3 basic microprocessor modules 72 x 72 for generator control. These modules display all information on leds. 10A relay outputs. • MDM: Manual start control unit with keyswitch • MDA: Auto start control unit with keyswitch. • MNS: Auto transfer switch control unit with 3 phases mains voltage detection • Voltage input: 15 to 300VAC and nominal frequency: 50-60 Hz ACGEN 2.0 & icgen2.0 CRE TECHNOLOGY offers two additional modules for generator control. These modules can be fully programmed either by...

Open the catalog to page 2

GENERATOR CONTROL SOLUTIONS Innovation for better control REMOTE DISPLAY & CONTROL WITH i4Gen HMI Discover our brand new remote functions for the management and configuration of your power plants with AMF COMPACT. • An embedded WIFI communication fully configurable: Allows connection to any WIFI spot available or Access point mobile phone for remote CONTROL AND SUPERVISION through i4Gen touch screen. • 3G/4G modem and WAN port • Emails sending on configurable events: 10 different emails addresses are available. Events could be alarms or faults or events (Start/Stop, breaker closure, manual mode...)...

Open the catalog to page 3

HOW TO CONTACT OUR AFTER SALES SERVICES TEAM: • By email: [email protected] • By Skype: support-cretechnology.com • Phone: +33 (0)4 92 38 86 86 EXPERT IN GENERATOR SOLUTION www.cretechnology.com GENERATOR CONTROL RANGE_EN_D2022

Open the catalog to page 4

generator-control

generator-control

Catalog excerpts

All CRE TECHNOLOGY catalogs and technical brochures

Archived catalogs