*mydirectindustry

Catalogs
CRE TECHNOLOGY
compact range product information

compact range product information

1 / 2 PagesView full catalog

compact range product information

Product catalog summary

Features:

Protections include short circuit, overload, and over voltage.
LED indicator for power status.
Cooling via free air convection.
DIN rail installation capability (TS-35/7.5 or TS-35/15).
FAULT contact available.
No load power consumption is less than 0.75W.
100% full load burn-in test conducted.
3-year warranty provided.

Output Specifications:

DC Voltage: 24V (BPR 0324S) and 12V (BPR 0512S).
Rated Current: 2.5A for 24V and 5A for 12V.
Rated Power: 60W for both models.
Ripple Noise: 150mVp-p for 24V and 120mVp-p for 12V.
Voltage Adjustment Range: 24-30V for 24V and 12-15V for 12V.
Line and Load Regulation: +/- 1%.
Setup and Rise Time: 500ms, 30ms/230VAC or 115VAC at full load.
Hold Up Time: 50ms/230VAC and 20ms/115VAC at full load.

Input Specifications:

Voltage Range: 85-264VAC or 120-370VDC.
Frequency Range: 47-63Hz.
Efficiency: 88% for 24V and 86% for 12V.
AC Current: 1.8A/115VAC and 1A/230VAC.
Inrush Current: Cold start 30A/115VAC and 60A/230VAC.
Leakage Current: Less than 1mA/240VAC.

Protection Features:

Overload: 105-150% rated output power with constant current limiting and auto-recovery.
Over Voltage: 31.2-36V for 24V and 15.6-18V for 12V with shutdown and re-power on recovery.
Over Temperature: Shutdown with automatic recovery after cooling.

Environmental Specifications:

Operating Temperature: -25 to +70°C.
Operating Humidity: 20-90% RH non-condensing.
Storage Temperature and Humidity: -40 to +85°C, 10-95% RH.
Vibration: Compliance with IEC60068-2-6.

Safety and EMC:

Withstand Voltage: I/P-O/P: 3KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC.
Isolation Resistance: 100M Ohm / 500VDC / 25°C / 70% RH.
EMI Compliance: EN55011, EN55022, EN61204-3 Class B.
EMT Immunity: Compliance with EN61000 standards.

Additional Information:

MTBF: 299.2Khrs min (MIL-HDBK-217F at 25°C).
Dimensions: 40 x 90 x 100mm.
Packing Weight: 0.33Kg.
Installation clearances recommended for optimal performance.
Derating may be necessary under low input voltage conditions.

Catalog excerpts

compact range FEATURES • Protections: Short circuit/ Overload/ Over voltage • LED indicator for power on • Cooling by free air convection • Can be installed on DIN rail TS-35/7.5 or TS-35/15 • FAULT contact • No load power consumption <0.75W • 100% full load burn-in test • 3 years warranty product information battery chargers www.cretechnolog y.com

Open the catalog to page 1

product information battery chargers COMPACT RANGE battery chargers MECHANICAL SPECIFICATIONS product information DERATING CURVE OUTPUT DERATING vs INPUT VOLTAGE (VAC) BLOCK DIAGRAM RECTIFIERS & FILTER POWER SWITCHING RECTIFIERS & FILTER BP DIODE KIT PROVIDED WITH CHARGER

Open the catalog to page 2

compact range product information

compact range product information

Catalog excerpts

All CRE TECHNOLOGY catalogs and technical brochures

Archived catalogs