Crane Electronics Ltd The force in torque management tJRS Opta Threaded Joint Rate Simulator Bench

Crane Electronics Ltd The force in torque management The tJRS Opta is the only fully automated Joint Simulator Bench that is based on a threaded fastener. This means that Joint conditions can be set up in the same way as in real fastener applications, and also the Joint can be automatically “backed off”. As a result, Tools can be tested off-line under the most realistic conditions of any automated Joint Simulator, in a quick and efficient manner. The tJRS Opta combines many of Crane’s proven class leading products along with innovative techniques based on simple mechanical principles, allowing...

Crane Electronics Ltd The force in torque management Mounting: 330Nm & 500Nm tJRS Opta. On 4 wheels:- 2 fixed, 2 swivel with brakes. Wheel diameter 200mm. 1000Nm tJRS Opta. On a carrier that can accept pull truck or be left in a fixed location. Mounted on 4 feet. Surface: Oil resistant engineering plastic. Power/Battery: Powered by 2 x 12V sealed lead acid batteries that gives approximately 8 hours of typical use on a full charge. Internal battery charger is fitted to charge batteries in 10 hours from a 100- 240V mains voltage. Operates when the batteries are being charged. PC receives power...

Crane Electronics Ltd The force in torque management tJRS Opta Technical Specification: Measurement units: 330Nm tJRS Opta. Maximum Torque: 330Nm. Minimum Torque: 1Nm. 500Nm tJRS Opta. Maximum Torque: 500Nm. Minimum Torque: 1Nm. 1000Nm tJRS Opta. Maximum Torque: 1000Nm. Minimum Torque: 1Nm. Weight: Depends on configuration. Beams: 500Nm tJRS Opta. 500Nm, 100Nm and 10Nm beam. 1000Nm tJRS Opta. 1000Nm, 330Nm and 25Nm beam. Bolts and Nuts: Bolts and nuts are replaceable and removable from the top. Each bolt, thread and under collar nut has its own automatic greasing system. Adaptors provided to...

Crane Electronics Ltd The force in torque management Product Description The tJRS Opta from Crane Electronics is the latest generation Joint Rate Simulator featuring a system covered by several patents. As with all products in the Opta range the tJRS integrates seamlessly into the OMS software package to provide a complete Torque measurement solution. Traditionally, automated Joint Simulators have used friction brake systems in place of a threaded fastener. The reasons for this were to overcome the two main issues which are having to reverse, or back-off, after each rundown and the cumbersome...

Crane Electronics Ltd The force in torque management The tJRS Opta system removes the need to reverse the fastener, or remove the Tool drive during the back off process. This makes it an ideal Tool for improving the efficiency of Tool certification. It is particularly important when testing higher Torque Tools, many of which do not have a reverse gear. Another major advantage of using a Joint Simulator is the ability to change the Joint conditions through a software interface rather than time consuming mechanical reconfiguration. Crane has pioneered the use of its patented twin beam systems using...

Crane Electronics Ltd The force in torque management The tJRS Opta is a modular system which allows the user to select from a number of Torque ranges, or beams. This ensures the configuration of a unit which best meets customer requirements. The modular design also enables specific custom units. For units with multiple beams, the tJRS Opta automatically selects the Transducer to use and informs the operator via a clear graphical notification. For an even greater degree of control when testing Tools that are particularly susceptible to excessive inertia, or when Tools have non-standard drive sizes,...

Crane Electronics Ltd The force in torque management Complete torque management systems from Crane Electronics Crane Electronics Ltd Watling Drive Sketchley Meadows Hinckley LE10 3EY Tel: +44(0) 1455 25 14 88 www.crane-electronics.com Crane Electronics Inc 1260 11th Street West Milan, Illinois 61264 USA Tel: +1 309-787-1263 www.crane-electronics.com