Self Contained Compactor Specifications

Product catalog summary

Overview: The document provides detailed specifications for the SC Series of self-contained compactors, focusing on various models and their technical parameters.

Specifications:

Compactor Capacities: Models range from 1 cu yd to 2.5 cu yd in charge box capacity, with cycle times varying from 28 to 41 seconds.
Force and Pressure: Total force ranges from 39,300 lbs to 53,000 lbs, with ram face pressure between 22.6 psi and 48.0 psi.
Ram Dimensions: Ram face dimensions are primarily 60" x 29" or 60" x 23".
Motor and Hydraulic System: All models use a 10 hp motor with a hydraulic reservoir capacity of 22 gallons and a pump capacity of 10.5 gpm.
Hydraulic Cylinder: Bore diameters are either 4" or 5", with stroke lengths from 26" to 41".

Dimensions and Models:

SC-T1 Models: Range from 13' 2" to 23' in length, with capacities from 10 cu yd to 25 cu yd.
SC-T2 Models: Feature lengths from 15' to 25' 10", with capacities from 15 cu yd to 38 cu yd.
SC-02 Models: Include low profile options, with lengths from 19' to 25' 5" and capacities from 20 cu yd to 34 cu yd.

Key Features:

All models are equipped with a 3-phase motor operating at 208/230/460 VAC.
Operating pressure is consistently at 2000 psi, with a maximum of 2400 psi.
Models are categorized into standard, low profile, and hydraulic tailgate variants.

Conclusion: The SC Series compactors are designed for efficient waste management, offering a range of capacities and configurations to suit different operational needs.

Catalog excerpts

Self Contained Compactor Specifications

Open the catalog to page 1

All Cram a lot catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list