video corpo

SDS series

SDS series

SDS series

Product catalog summary
Overview: The document provides technical specifications for Craig & Derricott's i-switch range of stainless steel sloping roof switch disconnectors, designed for hygienic environments with continuous wash down using caustic solutions. The design minimizes dirt accumulation.
Specifications:
  • Material: Stainless steel (Grade 316)
  • Thickness: Body 1.2mm, Lid 1.5mm
  • Finish: Satin (Brushed 150 grit)
  • Roof Slope: 15°
  • Sealing: IP66
  • Sizes: Two enclosure sizes available
  • Isolator Interiors: 25A/32A (Size 1), 40A/63A (Size 2)
  • Format: 2 pole to 6 pole + 2 E/B auxiliary
  • Safety: Lid cannot be removed when padlocked (1-3 padlocks)
  • Fixings: Fully sealed to maintain IP66
  • Earth Terminals: Separate on enclosure & lid
  • Fixing Screws: Captive
  • Universal Fixings
Technical Data:
  • Rated Thermal Current (Ithe): 20A to 63A
  • Rated Insulation Voltage (Ui): 690V
  • Rated Impulse Voltage (Uimp): 6kV
  • Rated Operational Power (3 phase AC): Up to 30kW
  • Rated Short Time Withstand Current (Icw): Up to 1300A
  • Max. Fuse Size for Short Circuit Protection: Up to 80kA
  • Recommended Connecting Capacity: Flexible cable up to 16mm², Rigid cable up to 25mm²
  • Tightening Torque: 1.0 to 1.2 Nm
Accessories: Options for pre-drilled cable entries for M20 or M25 fittings are available by adding /M20 or /M25 to the catalogue number.
See more

Catalog excerpts

SDS series-1

i-switch - Stainless Steel sloping roof switch disconnectors (20A-63A) Based upon Craig & Derricott’s ‘i-switch’ range of isolation equipment, the specially designed stainless steel sloping roof enclosure is ideally suited for hygienic environments where continuous wash down takes place using caustic solutions. The design has been created to minimise areas where dirt can accumulate. Catalogue Nos :Format 20/25A 32A 40A 63A 2P SDSSR252 SDSSR322 SDSSR402 SDSSR632 3P SDSSR253 SDSSR323 SDSSR403 SDSSR633 3P+2 E/B SDSSR253EB SDSSR323EB SDSSR403EB SDSSR633EB 3P+N SDSSR253N SDSSR323N SDSSR403N SDSSR633N 6P SDSSR256 SDSSR406 6P+2 E/B SDSSR256EB SDSSR406EB Enclosure Size 1 Size 2 Features: • Enclosure material - Stainless steel (Grade 316) • Thickness - Body 1.2mm & lid 1.5mm • Finish - Satin (Brushed 150 grit) • Slope of roof - 15° • Flush backed enclosure • Sealing to IP66 • Two enclosure sizes • Option to supply pre drilled entries available. • Isolator interiors 25A/32A(Size 1), 40A/63A(Size 2) • Format - 2 pole to 6 pole+2 E/B auxiliary • Safety handle ensures the lid cannot be removed when a padlock is in position. Takes 1-3 padlocks. • Both enclosure and lid fixings are fully sealed to maintain IP66. • Separate earth terminals on enclosure & lid • Captive lid fixing screws • Universal fixings Typical Size 1 assembly Position for optional pre-drilled entries (see page 2) Hall Lane, Walsall Wood, Walsall, West Midlands WS9 9DP t: +44(0)1543 375541 f: +44(0)1543 361619 e: [email protected]

 Open the catalog to page 1
SDS series-2

i-switch - Stainless Steel sloping roof switch disconnectors (20A-63A) Technical Data:Data supplied against tests to IEC/BS EN 60947-3 Application Switch product range Rated thermal current Rated insulation voltage Rated impulse voltage Rated short time withstand current (1 sec) Max. fuse size for short circuit protection (gG Characteristic) Rated operational power (3 phase AC) Flexible cable Rigid cable Recommended connecting capacity Terminal type Tightening torque Accessories:For those who prefer to have cable entries pre-drilled we can offer the following two options:- 25A Three Pole version...

 Open the catalog to page 2

All Craig & Derricott catalogs and technical brochures

  1. PV Switch

    4  Pages

  2. FSDMR series

    2  Pages

  3. SDDG series

    3  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.