1. Catalogs
  2. CPS&S Inc. / Kallfass USA
  3. Universal 650/950N + HV
video corpo

Universal 650/950N + HV

Universal 650/950N + HV

Universal 650/950N + HV

Product catalog summary
Overview: The Universal 650/950N + HV shrink tunnels are designed for all Polyethylene applications, particularly suitable for fully-automatic sleeve wrappers like the Kallfass SW 500, SW 650/950 IL, and SW 500/800 Servo. These models feature high-capacity heating systems for excellent shrink results and adjustable airflow registers for product size adaptability.
Specifications: The Universal 650 N + HV and Universal 950 N + HV models have tunnel clearances of 25 inches and 37 inches in width, respectively, and fixed heights of 16 inches and 20 inches. Both models have a heated tunnel hood length of 67 inches and an extended outfeed of 24 inches. The working height is adjustable between 31.5 and 35.5 inches. They feature a rod chain conveyor with silicone-coated rods and variable speed control from 30 to 115 feet per minute.
Technical Features: The tunnels use a three-phase gear motor with a 0.37 KVA drive and variable heater blower capacity. Airflow is regulated by sliding registers, and temperature control is maintained by an electronic thermostat with a precision of 0±2°C. The power supply is 480V, 60HZ, with heating capacity installed at 30 KVA for the 650 model and 36 KVA for the 950 model.
Energy Efficiency: The HV models offer a complete fusion seal, using compressed air to overlap film layers, resulting in up to 15% film savings. Dual-layer tunnel chambers provide high insulation and energy savings.
Additional Features: Options include a weekly program timer, transfer rollers, machine on/off from packing machine, and a transport monitoring system. The HV models also feature additional thermal insulation and a film blow-up system for three widths.
Contact Information: For more details, contact CPS&S Inc. at 770-751-7400 or via email at [email protected]. More information is available on their website: www.kallfass-us.com.
See more

Catalog excerpts

Universal 650/950N + HV-1

Special shrink tunnel for sleevewrappers Universal 650/950N + HV Delivering Strong Shrink Results in Polyethylene Applications The Universal N and HV shrink tunnels are perfect for All Polyethylene applications. These models are ideal for fully-automatic sleeve wrappers such as the Kallfass SW 500, SW 650/950 IL as well as the SW 500/800 Servo. The Universal tunnels have high capacity heating systems which provide outstanding shrink results. Adjustable registers on both sides and bottom allow for fine-tuning of the airflow for all sizes of products. Variable speed blower and speed controls are also standard. The Universal HV tunnels offer an additional complete fusion seal when used with sleeve wrappers. This patented technology allows for completely enclosed packages to be produced inside the shrink tunnel. Compressed air is used to overlap the 2 film layers on both sides. Heated air from the bottom and sides heats and shrink films. This technology offers up to 15% film savings over other competitors using side seal stations or tuck and fold units to close the sides of the product. Dual layer tunnel chambers offer extremely high insulation and energy savings over single layer tunnel chambers.

 Open the catalog to page 1
Universal 650/950N + HV-2

Technical data Universal 650 N + HV Universal 950 N + HV Special voltage (for standard voltage see technical data) Machine dimensions (approx. in mm): (This drawing may show options which are not included in the basic machine version and are available against up-charge only.) CPS&S Inc. 770-751-7400 E-Mail: [email protected] Website: www.kallfass-us.com

 Open the catalog to page 2

All CPS&S Inc. / Kallfass USA catalogs and technical brochures

  1. COMPACT 650 D

    2  Pages

  2. Universa 300

    2  Pages

  3. COMPACT 650 T

    2  Pages

  4. Imagebrochure

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.