Shrink Tunnel for PE and Polyolefin Shrink Films STANDARD 650 NT Our versatile shrink tunnel, the STANDARD 650 NT, will enhance the appearance of your shrink packs - judge for yourself. The STANDARD 650 NT produces excellent overall shrink even with odd-shaped products, satisfying the most stringent quality standards. The machine is designed for medium to high production rates, for multi-packs (e.g. printed material), cans with supporting trays, or PE multi-packs- and now also for single display packs in polyolefin shrink film, this is ideal for products such as large praline boxes or large wooden picture frames. Energy efficient operation is provided by a two stage heating system, an air recirculation system, a dual chamber tunnel, and effective insulation of the tunnel hood. The Standard 650 NT has externally adjustable hot air flow controls. Air flow is guided around the product by adjustable flaps on the sides of the heating chamber and bottom registers. The Standard 650 NT is fitted with a rod chain conveyor with infinitely variable speed controls. The shrink tunnel is suitable for all industrially used films. Results count.

Facts, Data, Figures Technical data Tunnel clearance in width: Tunnel clearance in height, fix: Length of the heated tunnel hood: Extended tunnel outfeed: Working height, adjustable: Product transport - rod chain conveyor with silicone coated rods: Transport conveyor, speed variable: Drive: Heating blower capacity: Air-flow regulation: Temperature control by means of electronic thermostat: Control voltage: Power supply: Heating capacity, installed: Rated capacity: Nominal current at 400 V: Total connected load: Position of control cabinet and operating side: Colour: 650 mm 200 mm 1400 mm approx....