CPI/Microwave Power Products (MPP) offers superpower klystrons for particle accelerator applications. Typical performance for these devices are operating frequencies of 350 to 700 MHz and output power up to 1.3 MW CW. The VKP-7952 Series provides output power of 1 MW CW or peak for long pulse operation at 700 MHz. Features • 6-cavity rf circuit, including one 2nd harmonic cavity for enhanced efficiency • Single coaxial output window • Collector capable of dissipating the full beam power models available • VKP-7952A - 1 MW CW at 700 MHz, features an electron gun with a modulating anode • VKP-7952B - 1 MW CW at 704 MHz, features a diode gun • VKP-7952C - 1 MW pulsed at 704 MHz, 2 msec rf pulse length with a diode gun TYPICAL OPERATING PARAMeters Output Power Beam Voltage Beam Current Mod Anode Voltage Frequency 1 dB Bandwidth Saturated Gain Efficiency Collector Coolant Flow Body I Coolant Flow Body II Coolant Flow O/P Window Cooling (Air) Electromagnet: Gun Coil Current Gun Coil Voltage Main Coil Current Main Coil Voltage Size with Accessories: Length Width Height Weight Amps dc Volts Amps dc Volts inches / cm inches / cm inches / cm pounds / kg The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products, visit our website at: www.cpii.com, or contact: CPI MPP Division, 607 Hansen Way, Palo Alto, CA 94303 telephone : 1(800) 414-8823. fax : (650) 856-0705 | email : [email protected]

Typical performance characteristics Measured data for the VKP-7952A serial number 001: Beam voltage: 92 kV Beam current: 16.7 A Mod Anode Voltage: 75 kV Frequency Response Output Power (kWatts) Transfer Curve Output Power (kWatts) The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products, visit our website at: www.cpii.com, or contact: CPI MPP Division, 607 Hansen Way, Palo...