CW Products - Ka-Band VTA-6430A1
2Pages

The VTA-6430A Series are 500W CW Coupled Cavity TWT’s covering 27.5 - 31.0 GHz (Ka-Band) with 2 GHz instantaneous bandwidth, periodic-permanent-magnet focused, waveguide input, waveguide output, conduction cooled. This high-efficiency CC TWT is designed for use in satellite communication amplifiers Features • 500 Watt CW • 27.5 - 31.0 GHz • 2 GHz Instantaneous Bandwidth • PPM Focusing • Waveguide Input and Output (WG-28 Compatible with UG-599/U) • Vertical or Horizontal Mounting Position • Weight: 10 lbs. • Conduction Cooled TYPICAL OPERATING PARAMeters MAXIMUM MINIMUM Filament Voltage: 6.4 6.2 Filament Current: 1.6 (Surge: 5.0) 1.0 Focus Electrode Voltage: -6.3 -100 Beam Voltage: 14.5 13.5 Cathode Current: 350 --- Body Current 6.0 --- Collector Voltage 1: 36.0 34.0 Collector Current 1: 100 --- C ollector Voltage 2: 13.5 11.5 Collector Current 2: 350 --- Filament Warm-up Time: 3.0 --- TYPICAL UNITS --- Vdc --- Adc --- Vdc --- kVdc --- mAdc --- mAdc --- % of Ew --- mA --- % of Ew --- mA --- Minutes The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products, visit our website at: www.cpii.com, or contact: CPI MPP Division, 607 Hansen Way, Palo Alto, CA 94303 telephone : 1(800) 414-8823. fax : (650) 856-0705 | email : marketing@cpii.com CPI 10/09 Custom configurations are also available. These variations in the performance and configuration include: mechanical configuration, electrical and RF connections, and cooling method (affects average power level). CPI CPI || Mill im eter Wave coupled cav it y 4CW50,000J Millimeter Wave Coupled Cavity TWT Series

CPI | Mill im eter Wave coupled cav it y 4CW50,000J Millimeter Wave Coupled Cavity TWT Series The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products, visit our website at: www.cpii.com, or contact: CPI MPP Division, 607 Hansen Way, Palo Alto, CA 94303 telephone : 1(800) 414-8823. fax : (650) 856-0705 | email : marketing@cpii.com CPI 10/09