RLG-46 Long Arm Industrial Barrier
2Pages

protected by hot zinc spraying 250 gms/m 1.2 Complete housing: protected by yellow electrozinc dichromate thickness: 22 m. TREATMENT OF SURFACES 1. ANTI-CORROSION PROTECTION1.1 Internal mechanical parts: > The rising barrier type RLG46 with electric control, hasbeen specially designed to control access of vehicles to large areas. Its precise balance, achieved by means of an integrated compression spring, permits a span of up to a maximum of 14m\46ft. DESCRIPTION 1. Housing made of heavy gauge steel sheet of 3 mmthickness, welded and shaped, with a framework of steel profiles welded into a strong section.2. Removable upper hood, locked from inside. 3. Lateral doors with safety locks, ensuring easy accessto the internal mechanism.4. Boom made of extruded aluminium tubing, whiteenamelled with red reflecting stripes. The boom is composed of three sleeves of decreasing diameter with an end sealing cap.5. Bracing wires and adjustable stretchers in stainlesssteel. The number of wires varies from 2 to 4, according to the length of the boom. 6. Electro-mechanical assembly comprising:-120Vmotor, - life-lubricated speed reduction gearbox, ratio of reduction: 100/1, - gearbox driven by pulley and V-belt, allowing to adapt the operating speed in accordance with the length of the boom, - crankshaft/rod device ensuring progressive, shockless movements as well as mechanical locking of the boom in extreme positions, - safe passage is assured by an adjustable safety friction torque, regulated by Ferodo disks and self- adjusting device for wear taking up, - limit switches activated by adjustable cams.7. Balance of the boom achieved by means ofcompression spring, eliminating all risk of accident to people, thanks to the limited number of movable parts to which the general public have access.8. Electrical control board type PLC on a printed circuitremote controlled by a 3-push button box (open - stop - closed) supplied with the barrier.9. Built-in heater for low temperature locations. 10.Emergency crank for manual operation in theevent of power failure, with safety circuit breaker cutting the electrical power supply, providing the crank has not been removed from the barrier.11.Adjustable tip-support. 12.Embedded framework composed of a fixingtemplate with threaded rods and fixing claws. > 2 after sharp sand blasting > For dimensions and characteristics see overleaf...Specifications subject to change without notice CANADIAN PARKING EQUIPMENT LIMITED AMERICAN PARKING EQUIPMENT INCORPORATED

- Boom length: from 8-14 m\26-46ft maximum.- Position of the boom: central - Power supply: 120V - Other voltages available on request - Frequency: 50/60 Hz - Operational speed: 8 to 12 seconds according to the length of the boom - Motor:1/3 HP Instant reversing. - Speed reduction gearbox: VF110/A ratio of 100:1 OPTIONS TECHNICAL FEATURES 1 coat of polyurethane paint with 2 components, thickness: 40 m. Colour: orange RAL 2000 (other colours optional) 2.2 Finish coat: A number of options* are available upon request,some of which are as follows:- Additional 3-push button box.- Boom lighting* -...