1. Catalogs
  2. CPE APE
  3. MG-19 Manual Gate

MG-19 Manual Gate

MG-19 Manual Gate

Product catalog summary
Manually Operated Rising Barrier Type MG19
This document provides technical specifications and details for the MG19 manually operated rising barrier, designed for controlling access in areas with occasional traffic.

Surface Treatment
  • Anti-Corrosion Protection: The rotating assembly and vertical post are treated with hot zinc spraying (250g/m2) after sandblasting.
  • Painting: Includes a rustproofing primer and a polyurethane finish, each 40 µm thick, with standard color orange RAL 2000. Other RAL colors are available upon request.

Possible Options
  • Standard tip support for arm lengths over 5m.
  • Lockable tip support by padlock for any arm length.
  • Boom lighting with power supply box.
  • Alternate red and white plastic arm skirt.
  • Octagonal 'STOP' sign in one or two directions.

Work Not Included
  • Concrete base for frame and tip support.
  • Power supply and wiring for boom lighting.

Characteristics
  • Net weight: 120 Kg for a 2m-arm barrier, 146 Kg for a 6m-arm barrier.
  • Arm length: Minimum 2m (6.5ft), Maximum 7m (19ft).
  • Overall dimensions are provided in the document.

Description
  1. Vertical post made of tubular steel profiles with a ground fixing bracket.
  2. Barrier arm made of round tubular aluminum, white with red reflecting stripes.
  3. Pivot assembly made of flat steel profiles on a stainless steel rotating shaft.
  4. Cast iron counterweights for arm balance.
  5. Padlock fixing points for locking the arm, padlock included.
  6. Fixing frame to be buried in a concrete base.
  7. Tip support for arm lengths of 5.01m and longer (optional for arms up to 5m).

Contact Information
Canadian Parking Equipment Limited / American Parking Equipment Incorporated
Phone: (800) 565-4666 / (905) 673-0093
Fax: (905) 673-6687
Email: [email protected]
Website: www.cpeape.com
See more

Catalog excerpts

MG-19 Manual Gate-1

MANUALLY OPERATED RISING BARRIERMG19 This middle-span barrier has been designed to control access ways where traffic is occasional. SURFACE TREATMENT1 ANTI-CORROSION PROTECTION Rotating assembly and vertical post: hot zinc spray- ing (250g/m > WORK NOT INCLUDED POSSIBLE OPTIONS - Concrete base for fixing of frame and tip support. - Power supply and connection wiring in case of boomlighting. > 2) after sharp sand blasting. > 2а PAINTING - Standard tip support for arm length over 5m. - Tip support lockable by padlock, for any arm length. - Boom lighting with power supply box. - Alternate red and white plastic arm skirt. - Octagonal STOPӔ sign in one or two directions. CHARACTERISTICS -One coat of rustproofing primer, 2-component mic-aceous iron epoxy, 40 m thick.- One coat of 2-component polyurethane finish paint, 40 յm thick. Standard colour: orange RAL 2000 (Other RAL colours available as options: reference number to be given with order). Polymerisation of successive coats accelerated by oven drying at 80C. - Net weight:of a 2m-arm barrier: 120 Kgof a 6m-arm barrier: 146 Kg.-Armlength:min. 2m-6.5ft., max. 7m-19ft. - Overall dimensions:see below. 1.Vertical post made of tubular steel profiles with bracketfor ground fixing.2. Barrier arm made of round tubularaluminumfor added added strength without the weight of similar wooden arms. Arm is white with red reflecting stripes on both sides.3. Pivot assembly made of flat steel profiles, mountedon stainless steel rotating shaft with arm fixing brackets.4. Cast iron counterweights sliding on pivot assemblyfor arm balance whatever the arm length and posi- tion.5. Padlock fixing points for locking arm in closed or openposition, padlock included.6. Fixing frame to be buried in a concrete base. 7.Tip supportfor arm length of 5,01m (16 Feet)and longer (optional for arm up to 5m). OVERALL DIMENSIONS DESCRIPTION > 1020210810 325 75MIN. 2000 - MAX. 6000 (6.5-19 Feet) 275 225 920960 ROAD WIDTH 700 390 350450150260 250 Specifications subject to change without notice CANADIAN PARKING EQUIPMENT LIMITED AMERICAN PARKING EQUIPMENT INCORPORATED Phone: (800) 565-4666\(905) 673-0093 Fax: (905) 673-6687 Internet: [email protected] www.cpeape.com size="-1">

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.