DrumQuik® PUR
2Pages

Catalog excerpts

Dispensing System for Professional, High Purity Chemical Management DrumQuik® PUR is an easy-to-use product for extracting high purity chemicals from rigid containers (jerry cans, drums and IBCs) using common pumps within a closed-system design. The integrated flare outlet fitting allows easy connections to chemically resistant tubing such as PFA or FEP. The system minimizes chemical exposure and promotes employee and environmental safety. DrumQuik PUR is ideally suited to cost-sensitive one-way/single-use applications and can be disposed of, recycled along with the container or reused with a new container. DrumQuik PUR products are manufactured in a cleanroom and double bagged to maintain purity until ready for use. Features Benefits Quick connect/disconnect Allows faster container change-outs Automatic shutoff valve Stops flow when disconnected Cleanroom manufactured Assures high level of purity Applications: •A cids, caustics and solvent delivery Disposable drum insert Minimizes chemical exposure & contamination • harmaceutical chemical P handling Uncoupled: Vacuum to 45 psig (3.1 bar) Coupled: Vacuum to 22 psig (1.5 bar) • hotovoltaic cell P manufacturing NOTE: The torque specifications listed above are general recommendations which may need to be adjusted + or – depending on specific application. • aboratory chemical L handling DrumQuik® PUR Flow Performance Pressure Drop (psid) Drum insert & dip-tube: Virgin polyethylene (HDPE) Shipping plug: Virgin polyethylene (HDPE) Coupler: Virgin PVDF Spring (coupler only): Virgin PEEK UHP (PPS or Teflon® encapsulated 316 stainless steel optional) Seals: Coupler seals: FKM (Simriz® UHP FFKM Perfluoroelastomer optional) Bung seal: Polyolefin (POE) (EPDM or FKM optional) Shipping plug seal: EPDM (FKM optional) Torque specifications: 2" Buttress – 20ft-lbs (27 N-m) Shipping plug – hand tight Note: As tested with water.

Open the catalog to page 1

g, r codin For colo sample d an keying o ns — kit opti . catalog see main Couplers: PVDF Part Number Description DQPUR120112 3/4" flare liquid port Drum Inserts: HDPE Part Number Description DQPUR202BUT American buttress thread 2" Liquid Port Note: See modified standard material options below. Vent Port Locking Ring (turn to connect) Note: The length indicated in the part number is the length as measured from the sealing surface of the container to the end of the dip-tube. This is ~ 80mm longer than the actual length of the dip-tube itself. Assembled Drum Inserts & Dip-tubes Description D...

Open the catalog to page 2