*mydirectindustry

Catalogs
COVAL
Vacuum switch PSK Series

Vacuum switch PSK Series

Product catalog summary

Overview
The PSK series mini vacuum switches are designed for compact and lightweight applications, allowing installation close to suction cups to reduce response times. They are ideal for applications requiring a simple 'object gripped' signal and are cost-effective for setups with one vacuum generator per suction cup.

Specifications

Model: PSK 100
Setting Pressure Range: 0 to 100% vacuum (0 to -101.3 kPa)
Withstand Pressure: 0.6 MPa
Fluid: Air, Non-corrosive/Non-flammable gas
Power Supply Voltage: 10.8 to 30 VCC
Load Current: 80mA max.
Internal Voltage Drop: ≤ 0.8 V
Current Consumption: 10 mA max.
Sensor Type: PNP
Output Short Circuit Protection: Yes
Setting Method: Adjusting by VR
Response Time: Approx. 1ms
Repeatability: ≤ +/-1% F/S
Hysteresis: 3% F.S. max.
Indicator: Red LED turns ON
Enclosure: IP 40
Temperature Characteristic: ≤ +/-3% F/S of detected pressure (25°C) at temp. range of 0~50°C
Ambient Temperature Range: Operation: 0 ~ 60°C (32 ~ 140°F), Storage: -20 ~ 70°C (-4 ~ 158°F)
Ambient Humidity Range: Operation/Storage: 35-85% RH (No condensation)
Vibration: Total amplitude 1.5 mm, 10Hz-55Hz-10Hz scan for 1 minute, two hours each direction of X, Y, and Z
Shock: 980m/s² (100G), 3 times each in direction of X, Y, and Z
Vacuum Connection: Push-in tube or thread-in
Electrical Connection: M8 connection 3-pin (Cable L:150 mm)
Weight: Approx. 8.3 g (with M8, 3-pin male connector)

Dimensions

Compact size: 26 x 10 x 10.4 mm
Weight: 8.3 g

Installation and Connection

Simple installation with plug-in port or thread-in fitting
Electrical connections: M8, 3-pin male connector
Ø6mm stem for one-touch push fitting, Male M5 or G1/8"-M

Industry-Specific Applications
For all orders, specify the model, measuring range, vacuum connection, and connection. Example: PSK100G18M8.

Advantages

Simple installation with plug-in port for push-to-connect fittings
Extremely compact size to fit the most confined areas

Catalog excerpts

Industry-specific applications PSK Mini Vacuum Switch The PSK series adjustable vacuum switches, due to a compact and ultra-light design, enable installation close to the suction cups for reduced reponse times. PSKs are ideal for applications requiring only a simple "object gripped" signal, and offer an economical and effective solution for applications with one vacuum generator per suction cup. ■ Simple installation, plug-in port or thread-in fitting ■ Compact size : 26 x 10 x 10.4 mm ■ Weight: 8.3 g For all orders, please specify: Model + Measuring range + Vacuum connection + Connection Example: PSK100G18M8www.coval.com - 11/3 - vacuum managers

Open the catalog to page 1

Vacuum switch PSK Series

Vacuum switch PSK Series

Catalog excerpts

All COVAL catalogs and technical brochures