VS series suction cups with bellows are recommended for gripping products on different planes (wide deflection) where they can replace spring systems, and for gripping spherical or cylindrical objects gripped at an angle (ball-joint effect). ■ Large deflection (stroke) ■ Flexibility Materials NBR Nitrile SIT5 Industry-specific applications Translucent silicone Siton® 60 ShoreA Siton® 50 ShoreA (on request) (1) Actual force of the suction cup in use with 65% vacuum and including a safety factor of 2 for horizontal handling. (2) On request, some models are available in STN5 ( Siton® 50 ShoreA) ■ Standard available configurations (suction cup + fitting) □ Additional mounting configurations Fitting: M = male F = female refer to page 2/44 see page 2/47 Types of Assembly COVAL suction cups can be assembled in a wide variety of configurations. Version C Barbed fitting Version S Factory-crimped fitting Textured Surfaces For handling objects with a granular or textured gripping surface, use VS suction cups with the VSBM foam strip option (see page 2/59). Version V Removable fitting: E (adapter and hollow screw) Version E Pressed fitting Please specify the part n°. e.g. VS32SIT5IF14 Refer to page 2/44 Accessories To optimize the use of your suction cups, Coval offers a comprehensive range of accessories (nozzle fittings, spring extensions, and feeder systems, etc.), see chapters 4 and 12.

VS Suction Cups with 2.5 Bellows 0 5 to 88 mm References - “Suction Cup + Fitting”Group 1 Additional mounting configurations are available (see page 2/47). For standard configurations (suction cup+fitting), the C and V versions are delivered unassembled. COYAL vacuum managers

Note: All dimensions are in mm. (1) f = Deflection of the suction cup. (2) 0 G2 = 0 internal orifice of the fitting. , COVAL vacuum managers

VS Suction Cups with 2.5 Bellows 0 5 to 88 mm Dimensions - “Suction Cup + Fitting” Group 2 (2) 0 G2 = 0 internal orifice of the fitting.

VS 88 Group 3 Factory-crimped fittings Removable fittings Hg micg Adapters □ Configurations (suction cup + fitting) refer to page 2/44 □ Non-standard configurations must be ordered in seperate part numbers. Fittings and suction cups dimension: see page 2/48. www.coval.com - 2/47 - COYAL vacuum managers

The values represent the average characteristics of our products. (2) Flow restrictor version available: orifice calibrated to reduce leaks when used with a multi-cup gripper (see page 4/9) Note: All dimensions are in mm. (3) Available in stainless steel COVAL vacuum managers