Overview

This document provides technical specifications and usage guidelines for steel suction cups with bonded seals, designed for industrial applications involving the horizontal handling of heavy loads or objects with uneven surfaces such as concrete slabs or wood.

Specifications

• Materials: Body made of painted steel; foam seal made of nitrile.
• Dimensions: Various models with detailed measurements including diameter (ØA), height (H), length (L), and other parameters (I, M1/M2) are provided in millimeters.
• Force: Measured at 65% vacuum with a safety factor of 2 applied.
• Fittings: Two types available - 5000 An ring fitting and 5000 Ch cap fitting.

Product Range

The suction cups come in a wide range of sizes and shapes to accommodate different load types and surface conditions. The table lists models such as 5020, 5028, 5035, 5050, 5085, 5150, 5240, 5330, and 5500 with corresponding dimensions and fitting types (e.g., G1/4"-F, G3/8"-F) and associated force values.

Applications

These suction cups are specifically designed for horizontal handling of heavy or thick sheet metal and objects with uneven surfaces. Their design allows for secure gripping on challenging materials.

Options and Ordering

• Optional spring system mounting is available (referenced on page 4/5).
• When ordering, specify the suction cup model along with the fitting model (e.g., "5050 5000 An").

Notes

• All dimensions are in millimeters.
• Force values represent average product characteristics.