VP series flat suction cups are specially recommended for handling flat, rigid, smooth products. ■ High tensile force ■ High resistance to lateral forces enabling vertical handling. ■ High degree of precision Materials NBR Nitrile SIT5 Translucent silicone NR Natural rubber STN Siton® Industry-specific applications (1) Actual force of the suction cup in use with 65% vacuum and including a safety factor of 2 for horizontal handling and a factor of 4 for vertical handling. ■ Standard available configurations (suction cup + fitting) □ Additional mounting configurations Fitting: M = male F = female refer to page 2/4 see page 2/7 Types of Assembly COVAL suction cups can be assembled in a wide variety of configurations. ts* Version V: Removable fitting (adapter and hollow screw) Version C: Barbed fitting rs* cm Version S: Factory-crimped fitting Version E: Pressed fitting Please specify the part n° Refer to page 2/4 i.g. VP40STNIM14C Accessories To optimize the use of your suction cups, Coval offers a comprehensive range of accessories (feelers, nozzle fittings, spring extensions, and feeder systems, etc.), see chapters 4 and 12.

VP Flat Suction Cups 0 8 to 75 mm References “Suction Cup + Fitting” Group 1 Additional mounting configurations are available (see page 2/7). For standard configurations (suction cup+fitting), the C and V versions are delivered unassembled.

VP Flat Suction Cups 0 8 to 75 mm Dimensions “Suction Cup + Fitting” VP 8 - 10 Note: All dimensions are in mm (1) f = Deflection of the suction cup. (2) 0 G2 = 0 internal orifice of the fitting. , COVAL vacuum managers

VP Flat Suction Cups 0 8 to 75 mm Dimensions “Suction Cup + Fitting” Group 2 (1) f = Deflection of the suction cup. (2) 0 G2 = 0 internal orifice of the fitting. COVAL vacuum managers

Flat Suction Cups Ø 8 to 75 mm Assembly Diagrams VP 8 - 25 Barbed fittings Barbed fittings Pressed fittings Removable fittings Hollow screws Factory-crimped fittings Removable fittings Adapters G1/4”-M IM 14 F 18 Hollow screws Configurations (suction cup + fitting) refer to page 2/4 Non-standard configurations must be ordered in seperate part numbers.

VP Flat Suction Cups 0 8 to 75 mm Dimensions Suction CupsVP 8... 10 VP 15... 25 VP 26... 75 (1) f = Deflection of the suction cup. Sj COVAL vacuum managers