POLYESTER GRATING TRAPDOOR
2Pages

> ivoting trapdoor with self-closing P device securing openings on gateways which are fitted with fixed ladders > atch made of polyester grating H > elf-closing with integrated hydraulic S speed regulator GROUPS Industry Engineering offices A rchitects, control offices C ommercial and industrial buildings Silos, water tanks… T ravelling cranes, gantries Trapdoor OPENED One way access (climbing and descending with the same ladder) Multiple access (ladders which are connected together, emergency exit …) ÉVALUATION Ergonomics Price Trapdoor CLOSED IN COMPLIANCE WITH STANDARDS (1) NF E 85-016 NF EN ISO 14122-4 ZOOM / TECHNICAL DETAILS Frame made of 3 mm stainless steel sheet Hydraulic speed regulator (specific produced for Coutier) Each trapdoor is supplied with a sticking label indicating the type and the serial number in order to warrant the traceability of the products The floor made of grating enables to see if an operator is above or under the trapdoor (1) Our range of products is designed to comply with regulatory and normative requirements (BS EN ISO 14122-4, NF E 85-016). The security features depend on the specific risks in relation with facilities and machines ; our experts within ISO, AFNOR and DIN committees will advise you on the suitable choices. Composite material trapdoor C

Composite material trapdoor C2V REFERENCES C2V100: hatch made of polyester grating C2V200: hatch made of aluminium checkered sheet C2V300: hatch made of stainless raised-pattern steelplate (304L) MOUNTING B y welding on a steelplate or a grating floor B y bolting (bolts not supplied) on a steelplate floor B y clamps (not supplied) on a grating floor A ssembly bolting not supplied Estimated assembly time : 1 hour for 2 persones Equipment in compliance with following standards: - F E 85-016 (sliding and pivoting trapdoors) (2018) N - F EN ISO 14122-4: 2016 N Trapdoor can be custom-made...