*mydirectindustry

EXPORT

Product catalog summary

Access-Control System Overview
This document outlines the specifications and features of an access-control system designed for fixed ladders without cages. The system is intended to prevent unauthorized access and is suitable for telecom towers, lighting poles, and ski-lifts.

Specifications

The access-control door is installed at the bottom of the ladder, with the upper part located 3 meters above the ground.
Locking is achieved using a padlock, which is supplied with the product.
The door is compatible with ladders equipped with cable or rail fall arresters.

Product Design and Evaluation

Designed for one-way access, suitable for climbing and descending the same ladder.
Not recommended for ladders connected to others or used as emergency exits.
Evaluated based on ergonomics, anti-intrusion capabilities, and price.

Technical Details

Features high-resistance spring-loaded hinges for self-opening.
Includes a chain and padlock for securing the door in an open position.
Each door comes with a label for traceability, indicating type and serial number.

Compliance and Standards

Complies with NF E 85-012, EN ISO 14122-1, and EN ISO 14122-4 standards.
Security features are tailored to specific risks associated with facilities and machinery.

Assembly and Accessories

Can be assembled on standard ladders with a width of 400 mm between uprights.
Assembly options include riveting, bolting, or using brackets, depending on ladder material.
Estimated assembly time is 30 minutes for two people.

Technical Features

Double wall door made of 1.5mm thick steel sheet with galvanization for corrosion resistance.
Left or right opening options available, specified at the time of order.
Product weight is 17 kg and has been tested by the National Control Laboratory (LNE).

Additional Information

Available in stock with dispatching within 48/72 hours.
Comes with a 12-month warranty and individual cardboard packaging.
Certificate of conformity available upon request.

Catalog excerpts

<6> Access-control system for fixed ladders withoi EXPORT > Access-control door without hatchcover for any type of standard ladder without cage and with cable or rail fall arrester, fixed at the bottom of the ladder (the upper part of the door shall be located at 3 meters above the ground), preventing unauthorized and non-entitled people from climbing. > Locking by padlock GROUPS G Telecom towers G Lighting poles 0" Sky-lifts PRODUCT DESIGNED FOR G One way access (climbing and descending with the same ladder) Do not use on ladders connected with other ones and ladders used as emergency exits EVALUATION Ergonomics Anti-intrusion Price ♦♦♦♦♦♦ ♦♦♦♦♦♦ ♦♦♦♦♦♦ Access-control in opened position ZOOM / TECHNICAL DETAILS Access-control in closed position IN COMPLIANCE WITH STANDARDS ('> NF E 85-012 EN ISO 14122-1 EN ISO 14122-4 (1) Our range of access-control system sis designed to comply regulatory and normative requirements (EN ISO 14122-1 and NF E 85-012). The security features depend on the specific risks in relation with facilities and machines; our experts within ISO, AFNOR and DIN comities will advise you on the suitable choices. Each access-control door is supplied with a sticking label indicating the type and the serial number in order to warrant the traceability of the product The door is designed to enable the positioning of a rail fall arrester in the middle of the ladder or a cable fall arrester on the side of the ladder

Open the catalog to page 1

REFERENCES EXPORTA : hinges on the left hand side, galvanized steel (height 1 800 mm ) EXPORT B : hinges on the right hand side, galvanized steel (height 1 800 mm ) EXPORT E : hinges on the left hand side, galvanized steel ( height 2 500 mm ) EXPORT N AG : hinges on the left hand side, galvanized steel (height 1 800 mm ) specific for ladders on ski-lifts ACCESSORIES (optional) • Anti-intrusion rear bottom sheet for the ladder • Anti-intrusion side panels for the ladder ASSEMBLY On a standard ladder (400 mm width between the uprights). For other dimensions, please fill in the dimension data sheet....

Open the catalog to page 2

EXPORT

EXPORT

Catalog excerpts

All Coutier Industrie catalogs and technical brochures