> Access-control door with hatchover for any type of standard ladder with cage, fixed at the bottom of the ladder (the upper part of the door shall be located at about 2 300 mm above the ground), preventing unauthorized and non-entitled people from climbing. > Locking by padlock GROUPS Industry Enginerring offices Architects, control offices Commercial and industrial buildings Pylons, road signalization gantries Silos, Water tanks,… Travelling cranes, gantries PRODUCT DESIGNED FOR Access-control in OPENED position One way access (climbing and descending with the same ladder) Do not implement on ladders used as emergency exits or ladder connected between one another. EVALUATION Ergonomics Anti-intrusion Price IN COMPLIANCE WITH STANDARDS (1) NF E 85-012 EN ISO 14122-1 EN ISO 14122-4 ZOOM / TECHNICAL DETAILS The opening of the door is made by two high resisting spring-loaded hinges (specially produced for Coutier) Consignment with chain and padlock in opened position Each access-control door is supplied with a sticking label indicating the type and the serial number in order to warrant the traceability of the product Locking with padlock (supplied) (1) Our range of access-control system sis designed to comply regulatory and normative requirements (EN ISO 14122-1 and NF E 85-012). The security features depend on the specific risks in relation with facilities and machines; our experts within ISO, AFNOR and DIN comities will ad vise you on the suitable choices. Access-control system for fixed ladders with cage AC 600

REFERENCES CEC 610Z : hinges on the right hand side, galvanized steel , padlock CEC 620Z : hinges on the left hand side, galvanized steel , padlock CEC 613Z : hinges on the right hand side, aluminum, padlock CEC 623Z : hinges on the left hand side, aluminum, padlock ACCESSORIES (optional) • Anti-intrusion rear bottom sheet for the ladder • Anti-intrusion side panels for the ladder • Perforated metal sheet around the cage of the ladder (see accessories data sheet) ASSEMBLY On a standard ladder (400 mm width between the uprights). For other dimensions, please fill in the dimension data sheet. O'...