Specifications:
The AIR-OIL AP 300/2 E is equipped with an alternating current electric fan. It operates with oil flow capacities ranging from 20 to 160 liters per minute. The device supports voltages of 230V and 400V, with a frequency of 50/60 Hz. Power consumption varies between 110W and 160W, depending on the configuration, with current ratings of 0.19A to 0.7A. The air flow capacity is 1,300 m3/h, and it has a protection rating of IP44. The noise level is measured at 73 to 75 dB(A), and the unit weighs between 12 kg and 17 kg.

Performance Diagrams:
The performance diagram indicates a range of kr values from 0.2 to 0.26 kcal/h°C, corresponding to oil flow rates from 0 to 180 l/min. The loss of pressure diagram shows pressure losses from 0 to 0.9 bar across the same flow range.

Correction Factor:
The correction factor for different oil viscosities (cSt) is provided, ranging from 0.6 for 22 cSt to 7 for 220 cSt.

Components:
The system includes a capacitor, a thermo-switch with a range of 0-90°C, and connectors for both single-phase and three-phase electric fans. The single-phase fan operates at 230V, while the three-phase fan operates at 230/400V.

Wiring:
Wiring for the single-phase fan includes blue, yellow/green, and brown wires, while the three-phase fan includes yellow/green, brown, blue, black, and gray wires.