1. Catalogs
  2. Cortec Corporation
  3. Ecofog® VpCI®-337
cad

Ecofog® VpCI®-337
1 /2Pages

Ecofog® VpCI®-337

Ecofog® VpCI®-337
1 /2Pages

Catalog excerpts

Ecofog® VpCI®-337-1

Ecofog® VpCI®-337Biodegradable Fluid Clear to hazy amber liquid Water Thin, soft film >200°F (93°C) 32°F(0°C) 32-38% 7.2-9.0 (neat) 8.7-8.9 lb/gal (1.04-1.06 kg/l) PRODUCT DESCRIPTION Ecofog® VpCI®-337 is a ready-to-use waterborne vapor corrosion inhibitor for temporary protection of equipment and plants. It is a complete replacement for nitrogen blanketing and dry air systems that are both expensive to install and maintain. Nitrogen blankets are also a health hazard to personnel entering the interiors. Vapor phase Corrosion Inhibitors (VpCIs) in Ecofog® VpCI®-337 migrate and protect metal surfaces, resulting in time and cost savings. The Ecofog® VpCI®-337 is used to fog void spaces, tanks, containers, packages, and enclosures. These labor-saving techniques use a minimum of product to protect large areas or volumes. Ecofog® VpCI®-337 is effective on ferrous and non-ferrous metals as well as aluminum, plated steels, and copper. Ecofog® VpCI®-337 is consistently successful in providing protection to the basic metals, metalworking, and packaging industries. In most cases, products protected by Ecofog® VpCI®-337 are ready-to-use. No degreasing or stripping is necessary by most end users. The metal will retain a clean, rust-free surface. In most cases, the thin protective film will not affect paintability, conductivity, appearance, or any other important property of metals or alloys. Ecofog® VpCI®-337 is also available in a cold weather version. Ecofog® VpCI®-337 Winterized has a lower freezing point for the convenience of application and storage in cold temperatures. FEATURES • Biodegradable (87% biodegradation in 28 days) • Contains vapor phase inhibitors which provide multimetal corrosion protection • Forms a thin, self-healing layer of VpCI® that is environmentally safe for use • Ready-to-use • Protection is immediate, convenient to apply, and easy to remove if required *Biodegradability applies to Ecofog® VpCI®-337 only TYPICAL APPLICATIONS • Piping and pipe spools • Void space protection • Complex internal cavities • Double wall spaces TYPICAL PROPERTIES Ecofog® VpCI®-337 Appearance Carrier Film Type Flash Point Freeze Point Non-volatile Content ph Weight per Gallon Ecofog® VpCI®-337 Winterized Carrier Water + Propylene Glycol Weight per Gallon 8.8-9.2 lb/gal (1.05-1.10 kg/l) Note: Product may become

 Open the catalog to page 1
Ecofog® VpCI®-337-2

Ecofog® VpCI®-337 Winterized is packaged in 5 gallon (19 liter) plastic pails, 55 gallon (208 liter) metal drums, totes, and bulk. METALS PROTECTED • Hot/cold-rolled steel • Silicon steel • Stainless steel • Cast iron • Zinc • Aluminum • Copper • Brass Minimum storage temperature: -40°F (-40°C) Maximum storage temperature: 120°F (49°C) Shelf life is 24 months. APPLICATION Mix thoroughly prior to application. Fog or mist into containers, boxes, crates, and shrouded packages at a rate of 0.5-1.0 oz./ft3 (0.5-1.0 L/m3 ) of enclosed space. Always spray Ecofog® VpCI®-337 uniformly within enclosure...

 Open the catalog to page 2

All Cortec Corporation catalogs and technical brochures

  1. BioCorr®

    2  Pages

  2. Cortec GenBroch

    28  Pages

  3. BioClean 612

    2  Pages

  4. CorrTube®

    2  Pages

  5. EcoFilm®

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.