MINIRACK PLUS vertical storage
2Pages

VERTICAL STORAGE VERTICAL STORAGE A storage system based on the MINIRACK PLUS system, specially designed for the vertical storage of pipes, beams, profiles, frames, enz. The inclined leaning of your goods against the vertical storage system makes you realize considerable space. APPLICATIONS Timber yards, plumbers, DIY's, builder's merchants, etc. CARACTERISTICS 1. Frames. Available in 3 heights single- or double sided. Frame width 50 mm. Steel base included allowing anchoring to your floor. 2. Beams. The beams are required to connect the frames with each other. Their number varies with the frame height. The level of the beams is adjustable every 50 mm. Five lengths are available allowing you to optimize your installation. The beams are used to click on the divider arms or frames. 3. Dividers. Two types of dividers are available : the divider arm or the divider frame. They are hooked on to the beams. A divider frame for upright is also available : this type has to be installed on the upright rather than on the beam. 4. Poster holder. A poster holder can be fixed to the divider frames. Colour : blue. Dimensions : 305 x 215 mm (for A4 posters). Available for quantities exceeding 100 pieces. Price on request. 5. Anchors. The frames have to be fixed to the floor by means of two anchors per frame. To be ordered separately ! 6. Finishing. All parts lacquered blue RAL 5010. A light grey finishing RAL 7035 is possible at an extra cost of 10 %. Everything delivered unassembled with a installation manual supplied. A quote for installation by Cornix is available on request. (from 2010 frame bracing is galvanized) CORNIX ADVICE Opt for a double sided vertical storage system : hardly more expensive than a single sided one but 100 % storage gain !