Tropel® FlatMaster® Surface Form Analysis System Fast and Precise Measurements of Ground, Lapped, Honed, Polished and Super-finished Components The Tropel® FlatMaster® offers industry leading performance for surface form measurements to precision component manufacturers. Our non-contact optical technique analyzes the entire surface of the part in seconds, regardless of its size or complexity. The FlatMaster provides five nanometer resolution and a standard accuracy of 50 nm (2.0 µ”). It rapidly and accurately measures flatness, line profile, radius and other surface parameters on a variety of materials and surface finishes. A FlatMaster on the shop floor or in the QC lab will significantly improve processes, yields and productivity via full-form measurements with unprecedented speed and throughput. Improves product quality, manufacturing yield and throughput Lowers manufacturing costs Increases process awareness and understanding Reduces time-to-market Increases customer satisfaction High resolution and accuracy Large dynamic range Fast measurements – complete surface analysis in seconds Excellent reproducibility results from operator to operator Measures a variety of material types Measures a wide range of surface finishes Place the part and measure, little or no fixturing required Intuitive recipe driven operation Suitable for production, quality control, or development enviro

Tropel® FlatMaster® System Specifications Performance Part Size Range1 Dynamic Range2 Measurement method Accuracy3 Repeatability3 Resolution Measurement time Measured data points Measurement Datum Filtering Grazing Incidence Interferometry 50 nm (2.0 µinches) 15 nm (0.6 µinches) (1 sigma) 5 nm (0.2 µinches) 5 seconds typical up to 230,000 million per measurement Least squares, minimum zone ISO standard included Materials and Surfaces Materials Surfaces Reflectivity Maximum Roughness Metals, glass, polymers, ceramics, and many others Ground, lapped, polished, honed, super-finished and others Minimum...