SST-Ribbon? Cables
4Pages

{{requestButtons}}

Catalog excerpts

SST-Ribbon? Cables - 1

Readily identifiable ribbon IDs and fiber colors Individual fibers Precise fiber and ribbon geometries Easily accessible Excellent mass-splicing yields PE Outer Jacket Dielectric Strength Members Available with Gigabit Ethernet performance Meets industry standards including ICEA-640, IEC-60794-1-2, Telcordia GR-20 and is RDUP listed (formerly RUS) Water-Swellable Tape Buffer Tube Optical Fiber Ribbons | TRAINING | SPLICE AND TEST EQUIPMENT Rugged, compact design Waterblocking performance COPPER CONNECTIVITY Craft-friendly swellable polymer technology Corning Cable Systems SST-Ribbon™ Cables contain readily identifiable 12-fiber ribbons in a filled buffer tube. Steel or dielectric rods placed 180 degrees apart in the cable’s jacket provide the required tensile strength for armored and dielectric constructions, respectively. This cable design exhibits excellent waterblocking performance and is jacketed with a polyethylene outer jacket. Armored cables include a copolymer-coated steel tape armoring. An Evolant® Solutions Product SST-Ribbon™ Cables SST-Ribbon All-Dielectric Cable, 144-Fiber PE Outer Jacket Steel Strength Members CABLE ASSEMBLIES Filling Compound Buffer Tube Fiber Ribbons Filling Compound SST-Ribbon Cable SST-Ribbon Single-Armored Cable | Drawing ZA-3509 Water-Swellable Tape PRETERMINATED SYSTEMS Corrugated Steel Tape Armor SPECIFICATION SHEET EVO-51-EN | PAGE 1

Open the catalog to page 1
SST-Ribbon? Cables - 2

SST-Ribbon™ Cables Solutions Product Maximum Tensile Loads Short-Term: 2700 N (600 Ibf) Approvals and Listings RDUP PE-90 Common Installation Outdoor aerial, duct and direct-buried; indoor when installed according to National Electrical Code® (NEC®) Article 770 Minimum Bend Radius Loaded Installed "Actual Diameter may vary by ± 5%. SPECIFICATION SHEET EVO-51-EN | PAGE 2

Open the catalog to page 2
SST-Ribbon? Cables - 3

Optical Fiber Type (µm) Minimum Over Filled Launch (OFL) Bandwidth (MHz•km) Minimum Effective Modal Bandwidth (EMB) (MHz•km) Serial 10 Gigabit Ethernet Distance (m) Serial 1 Gigabit Ethernet Distance (m) *ITU 652.D compliant. EMB when deployed with 850 nm, 1 Gb/s VCSELs, as predicted by RML Bandwidth using FOTP-204. PRETERMINATED SYSTEMS Note: 1) Contact Corning Cable Systems Customer Service Representative for additional information. Maximum Attenuation (dB/km) CABLE ASSEMBLIES Performance Option Code SPLICE AND TEST EQUIPMENT Fiber Code COPPER CONNECTIVITY An Evolant® Solutions Product...

Open the catalog to page 3
SST-Ribbon? Cables - 4

SST-Ribbon™ Cables An Evolant® Solutions Product ordering information | Contact Customer Service at 800-743-2671 for other options. |1 Select fiber count. (Multiples of 12) 12 to 216 Select fiber code (see Transmission Performance table). Defines cable type. Select cable type. 4 = All-dielectric 5 = Armored Defines length marking. 4 = Markings in feet Defines tensile rating. 1 = 2700 N Select performance option code (see Transmission Performance table). Defines special manufacturing code. 53 = Standard jacket print Defines fiber placement. 1 = Standard for ribbon cables Corning Cable...

Open the catalog to page 4

All CORNING catalogs and technical brochures

  1. ActiFi®

    4 Pages

  2. OM2

    4 Pages

  3. OS2

    4 Pages

  4. OM1

    4 Pages

  5. HPFS®

    8 Pages

  6. Celcor®

    2 Pages

  7. CORE PRODUCTS

    62 Pages

Archived catalogs