Catalogs >
CORNING >
SST-Drop? Dielectric Cables

SST-Drop? Dielectric Cables
4Pages

Catalog excerpts

RDUP listed (formerly RUS) Material acceptability Eliminates bonding and grounding requirements SPECIFICATION SHEET LAN-685-EN | PAGE 1 SST-Drop Dielectric Cable | Drawing ZA-2191 SST-Drop Dielectric Cable | Drawing ZA-2190 PRETERMINATED SYSTEMS CABLE ASSEMBLIES SPLICE CLOSURES Fiber protection and signal integrity SPLICE EQUIPMENT Crush resistance Standard practices and hardware compatibility Standard ALTOS® Cables buffer tube in singletube design Corning Cable Systems SST-Drop™ Dielectric Cables offer the ease of installation of standard ALTOS® Cables in an easy-access, single-tube design. The dielectric version eliminates any bonding and grounding requirements. The cables are RDUP listed (formerly RUS) and offer exceptional crush resistance. Dielectric cables are also available in preconnectorized assemblies. A LANscape ® Solutions Product TEST EQUIPMENT SST-Drop™ Dielectric Cables, 1-12 Fibers

Open the catalog to page 1

SST-Drop™ Dielectric Cables, 1-12 Fibers specifications | Duct/Direct Buried Installation Maximum Tensile Loads Short-Term: Long-Term: Storage: Installation: Operation: Aerial Installation Maximum Tensile Load Convenient Contractor-Sized Packaging -40° to +70°C (-40° to +158°F) -30° to +70°C (-22° to +158°F) -40° to +70°C (-40° to +158°F) 609.6 m (2000 ft); gross weight 65 lbs; no specialized equipment needed Traditional Bulk Packaging Up to 12,100 m (40,000 ft); typically require reel payoff equipment NESC Environmental Loading Condition for Subscriber Drop Application 1% Installation Sag...

Open the catalog to page 2

Minimum Effective Modal Bandwidth (EMB) (MHz•km) Serial 1 Gigabit Ethernet Distance (m) Serial 10 Gigabit Ethernet Distance (m) Maximum Attenuation (dB/km) Minimum Over Filled Launch (OFL) Bandwidth (MHz•km) SPLICE EQUIPMENT TEST EQUIPMENT SPECIFICATION SHEET LAN-685-EN | PAGE 3 PRETERMINATED SYSTEMS Notes: 1) Improved attenuation and bandwidth options available. 2) Bend-insensitive single-mode fibers available on request. 3) Contact a Corning Cable Systems Customer Service Representative for additional information. 4) 50 µm multimode fiber macrobend loss ≤ 0.2 dB at 850 nm for two turns...

Open the catalog to page 3

SST-Drop™ Dielectric Cables, 1-12 Fibers A LANscape ® Solutions Product ordering information | Contact Customer Service at 800-743-2671 for other options. I Select fiber count. (001 to 012) Select fiber code (see Transmission Performance table). Defines cable type. Defines jacket. 4 = Dielectric strength members/PE jacket Defines fiber placement. 1 = All fibers in same tube (standard) Defines length markings. 4 = Markings in feet (standard) Defines tensile strength. 1 = 1350 N (300 lbf) Select performance option code (see Transmission Performance table). Defines special requirements....

Open the catalog to page 4