SC to SC Patch cord, 1 fibre, tight-buffered cable, LSZH, 2.8 mm legs Single-mode (OS2), 15 m Patch cables are used for non-permanent connections between patch panels, transmission equipment, etc. Pre-assembled cables allow for the implementation of complete “plug & play” solutions. When such a solution is adopted with accurate dimensioning and appropriate cable routing, it is possible to install even large cabling systems rapidly. Patch cables are used Features and Benefits Connectors - SC connector according to TIA/EIA-604 -3 - All connectors are tested to FOTP -21. - Connectors are pre-radius polished to provide the optimal end-face geometry for long-term performance. Cable Low smoke (IEC 61034) and zero-halogen (LSZH), flame retardant to IEC 60332-3-24 (C) and noncorrosive to IEC 60754-2 (FRNC) Cables are metal free; hence, there are no ground-loop or potential-equalisation problems Completely dry design (without gel) Colour of outer sheath: OM1, OM2 – orange; OM3, OM4 – turkuoise; OS2 – yellow Specifications General Specifications Flame Rating Cable Assembly Type Single Fibre Fibre Category Product Specification 585801R3Z31015M_EMEA_BEN Page 1 | Revision date 2013-05-22

SC to SC Patch cord, 1 fibre, tight-buffered cable, LSZH, 2.8 mm legs Single-mode (OS2), 15 m Temperature Range Operation Design - Connector A Connector Type Housing Material Housing Colour Boot Type Boot Colour Keyed (security) Mechanical Specifications - Connector A Durability Tensile strength jacketed cable Optical Specifications - Connector A Insertion Loss, Typical Reflectance, typical Product Specification 585801R3Z31015M_EMEA_BEN Page 2 | Revision date 2013-05-22

SC to SC Patch cord, 1 fibre, tight-buffered cable, LSZH, 2.8 mm legs Single-mode (OS2), 15 m Design - Connector B Connector Type Housing Material Housing Colour Boot Type Boot Colour Keyed (security) Mechanical Specifications - Connector B Durability Tensile strength jacketed cable Optical Specifications - Connector B Insertion Loss, Typical Reflectance, typical Cable Design Fibre Count Outer diameter Outer jacket colour Outer jacket material Minimum Bend Radius Crush Resistance (reversible) Tensile strength Chemical characteristics RoHS Product Specification 585801R3Z31015M_EMEA_BEN Page 3...

SC to SC Patch cord, 1 fibre, tight-buffered cable, LSZH, 2.8 mm legs Single-mode (OS2), 15 m Fibre Specifications Optical Characteristics (cabled) Fibre Name Fibre Type Fibre Core Diameter Fibre Category Maximum Attenuation 0.38 dB/km / 0.38 dB/km / 0.25 dB/km Serial 1 Gigabit Ethernet Serial 10 Gigabit Ethernet Cable cutoff wavelength TIA/EIA 492-CAAB, IEC 60793-2-50 Type B1.3, ITU-T G.652 D, ISO/IEC 11801 Cat. OS2 Fibre Code 1) Meets 0.75 ns optical skew when used in all Corning Cable Systems Plug & Play™/Pretium EDGE® Systems Solutions. 2) Improved attenuation and bandwidth options available...

SC to SC Patch cord, 1 fibre, tight-buffered cable, LSZH, 2.8 mm legs Single-mode (OS2), 15 m Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corning.com/cablesystems/emea A complete listing of the trademarks of Corning Cable Systems is available at www.corning.com/cablesystems/emea/trademarks. Corning Cable Systems is ISO 9001 certified. © 2013 Corning Cable Systems. All rights reserved. Product Specification 585801R3Z31015M_EMEA_BEN Page 5 | Revision date 2013-05-22