| A LANscape ® Pretium ® Solutions Product page 3 page 5 page 6 Plug & Play Universal Systems | Photo MM191 SPECIFICATION SHEET LAN-664-EN | PAGE 1 page 7 page 4 | page 17 PRETERMINATED SYSTEMS | CABLES | CONNECTORS | CABLE ASSEMBLIES | HARDWARE | page 9 SPLICE CLOSURES | TEST EQUIPMENT | SPLICE EQUIPMENT | Corning Cable Systems Plug & Play™ Universal Systems create a fiber optic tip-to-tip solution for data centers and storage area networks (SANs) consisting of housings, modules, panels, harnesses, trunks and jumpers. TRAINING Plug & Play™ Universal Systems

Plug & Play™ Universal Systems features and benefits | A LANscape ® Pretium ® Solutions Product Installing the System Universal wired modular system components Enable moves, adds and changes (MACs) without polarity concerns; provide a simple migration path between two-fiber and parallel optics applications There is no time-consuming fiber preparation and termination as found in traditional field installations. There are no consumables or piece parts, and no tools are required other than a screwdriver for installation of hardware. Standard and low-loss components Provide a means of meeting increasingly...

A LANscape ® Pretium ® Solutions Product PCH-01U CPP-ITM-PNL CPP-01U-PNL PCH-M3-01U PCH-M3-ITM CPP-M3-01U PCH-02U PCH-04U | Photo LAN2927 | Photo LAN1361 | Photo LAN2923 Product Dimensions W x D x H (in) Package Dimensions Shipping W x D x H (in) Weight (lbs) Maximum Fiber Module Density with or Panel LC Modules Capacity PCH-01U 1 17 x 16 x 1.75 24.25 x 20 x 4.75 11 48 2 CPP-ITM-PNL 1 19 x 0.35 x 1.75 19.75 x 5.75 x 2.5 0.5 48 2 CPP-01U-PNL* 1 19 x 0.4 x 1.75 19 x 5.13 x 3.5 0.5 48 2 PCH-M3-01U 1 16.8 x 12.75 x 1.75 20.13 x 17.25 x 4.75 3.85 72 3 PCH-M3-ITM 1 17 x 14.1 x 1.75 20.13 x 17.25 x...

Plug & Play™ Universal Systems A LANscape ® Pretium ® Solutions Product Pretium® Wall-Mountable Housings The Pretium Wall-Mountable Housings (PWH) are available in one, two, four, six and 12 panel/module configurations. Combined with the modules, panels, harnesses, trunks and jumpers, they provide a tip-to-tip solution for your fiber optic network. SPH-01P PWH-02P PWH-04P PWH-06P | Photo LAN2216 | Photo LAN2930 | Photo LAN2932 | Photo LAN2936 PWH-12P | Photo LAN2938 specifications and ordering information | Part Number Product Dimensions W x D x H (in) Package Dimensions Shipping W x D x H (in)...

A LANscape ® Pretium ® Solutions Product SPLICE EQUIPMENT | Plug & Play Universal Systems Modules TRAINING | Plug & Play™ Universal Systems HARDWARE | Plug & Play Module | Photo LAN1797 SPLICE CLOSURES | TEST EQUIPMENT | Plug & Play™ Modules provide the interface between the MTP® Connectors on the trunk and the LC or SC duplex jumpers that will then connect directly in the electronics. The LC duplex adapters feature hinged VFL-compatible shutters that move up and out of the way when the connector is inserted. Specially designed indents in the shutters ensure that the end faces of the connectors...

Plug & Play™ Universal Systems A LANscape ® Pretium ® Solutions Product Plug & Play™ Universal Systems MTP® Adapter Panels Plug & Play MTP Adapter Panels provide a simple interface to connect trunk harnesses to trunks, standard trunks to extender trunks or to facilitate the use of 40G electronics. Plug & Play Panel | Photo LAN3017 ordering information | CCH-CP - |1 |2 |1 |2 Select fiber count. Select fiber type. 36 3 MTP adapters = 72 = 6 MTP adapters 96 = 8 MTP adapters E4 = 12 MTP adapters (144 fibers) 69 = Multimode (OM1) E3 = Multimode (OM3/OM4) 90 = Single-mode (OS2) SPECIFICATION SHEET...

Module Harness | ™ | SPLICE EQUIPMENT SAN Director The 12-fiber Plug & Play Module Harness is designed to create a cross-connect point near the electronics by enabling port replication. This cross-connection is possible with duplex LC or SC connectors to interface with the electronics and a MTP® Connector to connect into the back of a module. With port replication, your day-x after multiple MACs in front of the electronics looks the same as day 1. Module SPLICE CLOSURES ZA-3897 |4 |6 Select non-pinned MTP Connectors. Select breakout connector type. Select leg length in inches (leg OD is 2.0 mm)....

Plug & Play™ Universal Systems A LANscape ® Pretium ® Solutions Product Standard Harness Application Plug & Play™ Universal Systems Pretium EDGE® Trunk Harnesses are designed to facilitate an interconnect point when the electronics are located in a separate area than the cross-connect or patching field. This interconnection is possible with Duplex LC or SC connectors to interface with the electronics and a PINNED MTP® Connector to connect into a trunk. Trunk Cable MTP Panel Module Pinned MTP Connector Trunk Harness SAN Director Plug & Play Trunk Harness | Drawing ZA-3901 ZA-3898 ordering information...

A LANscape ® Pretium ® Solutions Product SPLICE EQUIPMENT | Plug & Play™ Universal Systems MTP® Trunks SPLICE CLOSURES Plug & Play MTP Trunks | Photo LAN2727 ordering information | |1 |4 |7 |10 Select grip application. Select standard fiber count. Select leg length on end one or outside of reel. Select unit of measure. |2 Select non-pinned MTP Connectors (end one or outside of reel). 69 = 62.5 µm multimode, (OM1) 75 = 50 µm multimode, (OM3/OM4) 90 = Single-mode, (OS2) |3 Select non-pinned MTP Connectors (end two or inside of reel). 69 = 62.5 µm multimode, (OM1) 75 = 50 µm multimode, (OM3/OM4)...

Plug & Play™ Universal Systems A LANscape ® Pretium ® Solutions Product Plug & Play™ Universal Systems Extender Trunks Plug & Play Universal Systems Extender Trunks are used to distribute portions, or all, of the fibers in a Plug & Play Universal Systems trunk to other areas in the infrastructure. For example, a high-fiber-count trunk can be deployed from a main distribution area (MDA) to a zone distribution area (ZDA). Lower-fiber-count extender trunks can then be utilized to distribute fiber from the ZDA into cabinets. Plug & Play Extender Trunks | Photo LAN2777 ordering information | Plug...