Gigabit Ethernet Module | Photo TEQ33 Ethernet Performance Validation (RFC 2544) The Internet Engineering Task Force (IETF) has put together a test methodology to address the issues of performance verification at the layer two and three levels. RFC 2544, a “Benchmarking Methodology for Network Interconnect Devices,” specifies the requirements and procedures for testing throughput, back-toback frames (burst), frame loss and latency. The Gigabit Testing Module can perform the RFC 2544 test suite for 10/100/1000BASE-T and optical GigE interfaces at all frame sizes and at full-line rate. The Gigabit Testing Module supports automated RFC 2544 testing, which helps ensure repeatable results. Automation also provides ease of use for field technicians by enabling accurate, efficient measurements and results through a clear and simple pass/fail indication. (continued) SPECIFICATION SHEET LAN-1421-EN | PAGE 1 | SPLICE CLOSURES | TEST EQUIPMENT | SPLICE EQUIPMENT | TRAINING | The Gigabit testing module offers three essential Ethernet testing methods: HARDWARE Set test thresholds for clear pass/fail test results | Expert-mode capability The Gigabit testing module can be used in three configurations. • Module to Module - requires two modules; in this setup, one of the modules is placed in loop back mode so that it can act as a switch. • Module to Diverter - requires one module and the 1000-DIVERTER; the diverter is a simple switch which flips the sender and receiver MAC address and transmits the packet of data back to the module • Module to Switch - requires one module and one installed Gigabit switch; this setup is typically used for troubleshooting an existing Gigabit network CABLE ASSEMBLIES Install, commission and maintain Ethernet Networks | Transmits and analyzes multiple streams CONNECTORS Can test both copper and optical-based networks | Verifies connectivity in native formats CABLES Eliminates need for external monitor | Connection to OV-1000 V2 platform This Gigabit Ethernet Testing Module brings performance assurance to Ethernet-based services. Its testing functionality provides all the necessary measurement tools for verifying connectivity in its native format: 10/100/1000BASE-T, 1000BASE-SX, 1000BASE-LX and 1000BASE-ZX PRETERMINATED SYSTEMS features and benefits | A LANscape ® Solutions Product | OV-1000 V2 OTDR Optional Ethernet Module

OV-1000 V2 OTDR Optional Ethernet Module A LANscape ® Solutions Product Bit-Error Rate Testing (BERT) Ethernet is increasingly carried across a variety of layerone media for longer distances. This creates a growing need for the certification of Ethernet transport on a bit-per-bit basis, which can be done using bit-error-rate testing (BERT). BERT uses a pseudo-random binary sequence (PRBS) encapsulated into an Ethernet frame, making it possible to go from a frame-based error measurement to a bit-error-rate measurement. This provides the bit-per-bit error count accuracy required for the acceptance...

Ethernet Module Solutions Product Optical Interfaces Wavelength Range Laser Type VCSEL FP DFB Eye Safety CLASS 1 CLASS 1 CLASS 1 Electrical Interfaces Duplex Mode Half and full duplex Half and full duplex Full duplex only Jitter Compliance IEEE.802.3 ANSI X3.263-1995 IEEE.802.3 SPECIFICATION SHEET LAN-1421-EN | PAGE 3

OV-1000 OTDR Optional Ethernet Module A LANscape ® Solutions Product specifications | (continued) Gigabit Module 1000-GIG-MOD Ports (2) 10/100/1000BASE-T and (1) GigE SFP Connector Types RJ-45 (ISO 8877) and SFP Duplex Mode Full/half duplex auto-negotiation Maximum Port Capacity 2000 (bi-directional) Mb/s Size (H x W x D) 250 x 96 x 260 mm (9.75 x 3.74 x 10.14 in) Weight (without transceivers) 0.5 kg (1.1 lb) Operating Temperature 0°C to +40°C (+32°F to +104°F) ordering information | Part Number Description 1000-GIG-MOD Gigabit Ethernet Testing Module for OV-1000 platform; module has (2) 10/100/1000BASE-T...