NEW! Corning® ClearCurve® Multimode Mid-Temperature Specialty Optical Fibers for Harsh Environments Multimode bend insensitive optical fiber with midtemperature acrylate-based coatings The Corning® ClearCurve® Multimode bend insensitive fiber now includes even higher temperature and higher bandwidth capability. For use at temperatures up to 180 °C and beyond, this acrylate-based fiber delivers incredible macro bend performance with ease of use and handling; benefiting sensing systems operating in harsh environments. Applications: n Fiber Sensing and Data Transmission with tight bend and/or high bandwidth requirements for: • Aerospace and Defense • Structural Health Monitoring • Down-Hole Drilling Features: n Acrylate-base for ease of handling n Rated for up to 180 °C (fully qualified at 165 °C) n Available OM2 / OM3 / OM4 bandwidths Inquire for information about the application of mid-temperature coatings on glasses with optical properties that match your application or custom need. Page 1 n Hermetic coating (optional) for protection against hydrogen induced attenuation increase and improved fatigue resistance n Consistent strength over time at elevated temperatures n A fiber designed to meet your specific needs with recommended minimum bending radius of 7.5 mm n Fully compliant with ITU-Recommendations G651.1, and compatible with current optical fibers and practices M0300120 Issued: September 2012 Supersedes: June 2012

MM50BIA-B-C Key Optical Specifications Operating Wavelength (nm) 850, 1060, 1300 Cable Cutoff Wavelength (nm) N/A Maximum Attenuation (dB/km) @ 850 nm @ 1300 nm 2.5 0.7 Numerical Aperture 0.20 ± 0.015 Bandwidth (MHz-km) See table below MHz-Km OM4 950 2000 4700 850 nm 700 1500 3500 1300 nm Legacy Performance OFL OM3 850 nm High Performance EMB OM2 500 500 500 Key Geometric, Mechanical and Environmental Specifications Core Diameter (µm) 50 ± 2.5 Cladding Outside Diameter (µm) 125 ± 2.0 Coating Outside Diameter (µm) 245 ± 10 Core-to-Cladding Offset (µm) ≤ 1.5 Standard Lengths 500 m, 1 km, 2 km,...