Catalogs >
CORNING >
ClearCurve® Compact Drop Cable

ClearCurve® Compact Drop Cable
4Pages

Catalog excerpts

ClearCurve® Compact Drop Cable An Evolant® MDU Solutions Product Description Corning Cable Systems ClearCurve ® Compact Drop Cables are part of a product family developed to solve the challenges associated with multidwelling unit (MDU) deployments. Enabled by a truly bend-insensitive fiber, this small-profile, yet durable, cable is optimized for applications within the living unit. Smaller and more flexible than CAT 5e cable, ClearCurve Compact Drop Cable can accomplish tight turns to a minimum bend-radius of 5 mm (0.2 in) with negligible bend loss and can be run under carpet, along door frames and molding, in raceway or microduct. The cable consists of a single bend-insensitive fiber tightbuffered with a 900 µm jacket, surrounded by dielectric strength members and an outer flame-retardant jacket. With a standard yellow or optional neutral-toned jacket, this cable is riser rated (OFNR) for indoor vertical riser and general-purpose horizontal applications. ClearCurve Compact Drop Cable | Photo CCV016 Features / Benefits • Better than copper cable alternatives, ClearCurve Compact Drop Cable for MDU applications outperforms typical CAT 5e or CAT 6 cable with a: - Higher bandwidth-carrying capacity - Smaller outer diameter - Lighter weight - Smaller minimum bend-radius Flame-Retardant Outer Jacket 900 µm Tight-Buffered Fiber • Durable, bend-insensitive cable design enables installers to route cable around tight corners down to 5 mm (0.2 in) radius within the living unit in a variety of methods, including under carpet, around molding and door frames, in raceway and microduct Dielectric Strength Members 2.9 mm ClearCurve Compact Drop Cable | Drawing ZA-3187 • Available in riser-rated (OFNR) cable design for indoor vertical riser and general-purpose horizontal applications • Available in convenient contractor-sized packaging for easy field deployment Product Specifications EVO-761-EN | Page 1

Open the catalog to page 1

ClearCurve® Compact Drop Cable An Evolant® MDU Solutions Product Specifications Maximum Tensile Loads Short-Term: Long-Term: 220 N (48 lbf) 66 N (15 lbf) Temperatures Storage: Installation: Operation: -40º to +70ºC (-40º to +158ºF) -10º to +60ºC (+14º to +140ºF) -20º to +70ºC (-4º to +158ºF) Note: Corning Cable Systems recommends storing indoor cable in a proper temperature environment prior to installation to allow the cable temperature to meet installation temperature range specifications for best results. Approvals and Listings NEC® OFNR, CSA OFN FT-4 Common Installations MDU drop cable...

Open the catalog to page 2

ClearCurve® Compact Drop Cable An Evolant® MDU Solutions Product Ordering Information Contact your customer service representative at 800-743-2675 for other options. Part Number Description 001U31-A9405-29 ClearCurve® Compact Drop Cable with yellow jacket Note: A neutral colored jacket is available upon request. EVO-761-EN | Page 3

Open the catalog to page 3

ClearCurve* Compact Drop Cable An Evolanf MDU Solutions Product Corning Cable Systems LLC • PO Box 489 • Hickory, NC 28603-0489 USA f-y TVTTTVT/^ 800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/cablesystems V-f ^ ^ Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems products without prior notification. Evolant is a registered trademark of Corning Cable Systems Brands, Inc. ClearCurve is a registered trademark of I -| |^4-® Corning Incorporated. All other trademarks are the...

Open the catalog to page 4